Epson Stylus Color 660 Руководство по эксплуатации - Страница 31

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Аксессуары для принтеров Epson Stylus Color 660. Epson Stylus Color 660 40 страниц. Color ink jet printer
Также для Epson Stylus Color 660: Руководство пользователя (34 страниц), Информационный листок о продукте (4 страниц), Технический паспорт (2 страниц), Информационный листок о продукте (4 страниц), Информация о продукте (11 страниц), Начните здесь Руководство (20 страниц)

EPSON Stylus Color 660

5. Loosen the screw securing the printhead on the carriage. (You don't

need to remove it completely.)

Figure 5-23. Screw Position

NOTE: Make sure to loosen this screw. Otherwise, the printhead

angle will no change even if the adjusting lever moves.

If more than five minutes passed after moving the

carriage, the CR motor becomes OFF and cannot

accept the command to move the carriage.

In order to avoid this, the program indicates the

message. When the message "The printer has been

left alone for 5 minutes" appears at the bottom of the

head angular adjustment screen, click the OK button.

Chapter 5

Adjustment

Printhead securing screw

6. Look at the black/magenta combination in the pattern and move the

adjusting lever to make the magenta lines stay between the black

lines with even space. The figure below shows how the pattern

changes as the adjusting lever moves right (rear) or left (front).

Correct condition = evenly spaced

To move this up

move the lever

to the left (front)

Figure 5-24.

Lever Operation and Corresponding Change in Pattern

7. Repeat the procedures from step 3 to step 6 until the combination

pattern of black/magenta is correct.

8. After completing the adjustment, tighten the loosened screw, and

reinstall the upper case only when you remove it.

Revision A

To move this down

move the lever

to the right (rear)

Adjusting Lever