Epson Stylus Color 740i Информация о продукте - Страница 15

Просмотреть онлайн или скачать pdf Информация о продукте для Аксессуары для принтеров Epson Stylus Color 740i. Epson Stylus Color 740i 15 страниц. Epson stylus color 740i: quick start
Также для Epson Stylus Color 740i: Информационный листок о продукте (4 страниц), Брошюра и технические характеристики (2 страниц), Начните здесь Руководство (10 страниц)

Печатать страницу

EPSON Stylus COLOR 740i

Aligning the Print Head

If your printouts contain misaligned vertical lines, you may

need to align the print head using the Print Head Alignment

utility in your printer software. Your printer must be

connected to a local port, not on a network, to use this utility.

Follow these steps:

1. Make sure the printer is turned on and paper is loaded.

Caution:

Load paper that's at least 8.27 inches (210 mm) wide.

This prevents ink from spraying inside the printer and

smudging your printouts.

For the best results, load EPSON ink jet paper in the

printer whenever you check the print head alignment.

2. Start an application and open a document.

3. Access the printer settings dialog box as described in the

Printer Basics book.

4. Click the

tab (Windows) or the

Utility

(Macintosh). You see the Utility menu.

5. Click the

Print Head Alignment

6. Follow the instructions on the screen to print a test page

and select the correct alignment.

Cleaning the Printer

To keep your printer working at its best, you should clean it

several times a year, following these steps:

1. Turn off the printer, unplug the power cord, and

disconnect the printer cable.

2. Remove all the paper from the sheet feeder.

3. Clean the exterior of the printer with a soft, damp cloth.

4. Clean ink out of the printer's interior with a soft, damp

cloth.

Caution:

Don't touch the gears inside the printer.

Never use alcohol or thinner for cleaning; they can

damage the printer components and case.

Don't use a hard or abrasive brush.

Don't get water on the printer components.

Don't spray lubricants or oils inside the printer.

14 - EPSON Stylus COLOR 740i

Utility icon

icon.

4/99

Transporting the Printer

If you move your printer some distance, you need to prepare it

for transportation in its original box. Follow these steps:

1. Turn on the printer and wait until the print head locks in

the far right position. Then turn off the printer.

Caution:

To avoid damage, always leave the ink cartridges

installed when transporting the printer.

2. Unplug the power cord from the electrical outlet. Then

disconnect the interface cable from the printer.

3. Remove any paper from the printer and remove the paper

support.

4. Push in the output tray extensions and close the tray.

5. Repack the printer and attachments in the original box

using the protective materials that came with it. See the

unpacking sheet that was packed with your printer.

Be sure to keep the printer level as you transport it. If you

notice a decline in print quality after transporting the printer,

clean the print head (see "Cleaning the Print Head" on

page 12); if output is misaligned, align the print head (see

"Aligning the Print Head" on this page).

Epson Stylus Color 740i Информация о продукте - Страница 15

Aligning the Print Head

Cleaning the Printer

Transporting the Printer

Related Documentation