Epson Stylus Color C60 Руководство пользователя - Страница 7

Просмотреть онлайн или скачать pdf Руководство пользователя для Аксессуары для принтеров Epson Stylus Color C60. Epson Stylus Color C60 11 страниц. Color ink jet printer
Также для Epson Stylus Color C60: Бюллетень поддержки продуктов (6 страниц), Бюллетень поддержки продуктов (1 страниц), Прочитайте это первое руководство (12 страниц), Технические характеристики (1 страниц), Начните здесь (4 страниц), Руководство по установке программного обеспечения (1 страниц), Технические характеристики (2 страниц), Дополнительное руководство (1 страниц), Руководство пользователя (27 страниц), Руководство по совместимости (1 страниц), Технические характеристики (2 страниц), Бюллетень поддержки продуктов (3 страниц), Бюллетень поддержки продуктов (2 страниц), Бюллетень поддержки продуктов (4 страниц), Бюллетень поддержки продуктов (7 страниц), Руководство по настройке (3 страниц)

Печатать страницу

Epson Stylus Color C60 Руководство пользователя

1. Testing the Printer

6. Press down firmly on the ink cartridge clamp until it snaps

in place.

7. If you need to replace the other ink cartridge, repeat steps 2

through 6 before continuing with step 8.

8. Press the e ink replacement button and close the printer

cover. The printer begins charging the ink delivery system.

9. Wait until ink charging is finished (the P power light stops

flashing and the red b error light goes out).

Cleaning the Print Head

If your printouts are unexpectedly light or faint, or dots or

lines are missing from the image, you may need to clean the

print head. This unclogs the nozzles so they can deliver ink

properly. Print head cleaning uses ink, so clean it only if

quality declines.

This section explains how to clean the print head using the

Head Cleaning utility. This is the recommended method

when the printer is connected directly to your computer (not

over a network).

You can also clean the print head by holding down the

b maintenance button on the printer's control panel for three

seconds when the red b error light is off. See the Print Show

movies or electronic Reference Guide for detailed instructions.

When you don't turn on your printer for a long time, the

print quality can decline. It's a good idea to turn on your

printer at least once a month to maintain good print

quality.

Running the Head Cleaning Utility

1. Make sure the printer is turned on but not printing, and the

red b error light is off. (If the red light is flashing or on,

you may need to replace the ink cartridge; see page 6 for

details.)

2. Do one of the following:

❏ Windows: right-click the

the right side of the Windows taskbar. Then click

Cleaning

❏ Macintosh: Open the File menu and choose

Setup

the

Head Cleaning

3. Follow the instructions on the screen to clean the print

head. Cleaning takes about 30 seconds, during which the

printer makes some noise and the green P power light

flashes.

Never turn off the printer while the

flashing, unless the printer hasn't moved or made noise

for more than 5 minutes.

4. When the green P power light stops flashing, run a nozzle

check to confirm the print head nozzles are clean.

Make sure plain paper (not special ink jet paper) is loaded

in the printer and click

click

. The nozzle check pattern prints (see the next

section for details).

5. If the nozzle check pattern has no gaps or lines, click

If the pattern has white lines, click

head again.

If you don't see any improvement after cleaning three or

four times, check the solutions in your Printer Basics book.

You can also turn the printer off and wait overnight—this

allows any dried ink to soften—and then try cleaning the

print head again.

Examining the Nozzle Check Pattern

Examine the nozzle check pattern you print. Each black and

colored area should be complete, with no gaps or lines, as

shown below:

❏ If your printout looks okay, you're done.

❏ If any dots or lines are missing (as shown below), clean the

print head again; see the previous section for instructions.

7/01

EPSON Stylus C60

Status Monitor 3 icon on

. Click the

button, then click

Utility

button.

power light is

Print Nozzle Check Pattern

to clean the print

Clean

EPSON Stylus C60

Head

Page

. Then

Finish

- 7