Dillon GTS-1000 Руководство по эксплуатации - Страница 8

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Испытательное оборудование Dillon GTS-1000. Dillon GTS-1000 16 страниц.

Mounting the force gauge

For long stand life, the gauge must be mounted so the load cell stem is in-line with the

center of the internal columns. The standard GTS-1000 crosshead accommodates

gauges that measure between 8 – 28 mm from the back of the gauge to the load cell

stem center AND have 57 mm twin vertical hole spacing.

ll GS/GTX Series gauges mount directly to the GTS-1000 tester in perfect alignment

with the tester columns. Use included screws to secure.

another force gauge will be mounted, discuss mounting with your Dillon dealer.

CAUTION

When using a force

gauge other

than a Dillon GS or

GTX, it is the installer's responsibility to ensure:

1 . strength of all connections and insure hardware

mounting depth falls within gauge manufacturer

requirements, and

2. load cell stem

is centered on the

columns within

GTS-1000 specifications.

Choose the gauge mounting position on the crosshead noting the maximum rated stand

capacity at that position. Secure with two screws insuring maximum depth for gauge is

not exceeded.