Motorola XT1924-2 Руководство пользователя - Страница 24
Просмотреть онлайн или скачать pdf Руководство пользователя для Сотовый телефон Motorola XT1924-2. Motorola XT1924-2 32 страницы.
Печатать страницу
Connect, share & sync
Connect accessories, computers, networks and more.
Connect with Wi-Fi
Turn Wi-Fi power on/off
Find it: swipe up
>
Settings > Network & Internet > Wi-Fi, then tap the switch to
turn it on
When Wi-Fi is on, your phone automatically reconnects to available networks it has
used before.
Note: you can also turn Wi-Fi on and off in
Connect to networks
To find networks in your range:
1 Swipe up
>
Settings > Network & Internet > Wi-Fi.
2 With Wi-Fi turned on, tap a located network to connect to it. When connected, you'll
see
in the status bar.
Note: if you see a question mark in the Wi-Fi status indicator
down, tap the network and enter the network's password.
Wi-Fi hotspot
You can make your phone a Wi-Fi hotspot to provide portable, convenient Internet
access to other Wi-Fi enabled devices. Your phone turns off Wi-Fi and uses the mobile
network for Internet access. This feature may require an additional subscription service
from your service provider.
Find it: swipe up
>
Settings > Network & Internet > Hotspot & tethering, then
tap Portable Wi-Fi hotspot
Note: these steps may vary depending on your network.
1 Tap Set up Wi-Fi hotspot to set up security:
• Network name: enter a unique name for your hotspot.
• Security: select the type of security you want: None or WPA2 PSK. For WPA2
PSK, enter a unique password (8 characters) that others will need to access your
Wi-Fi hotspot.
Quick
settings.
, swipe the status bar
Note: to protect your phone and hotspot from unauthorised access, set up hotspot
security (WPA2 is the most secure), including a password.
2 Tap SAVE.
Wi-Fi modes
Your phone supports the following Wi-Fi modes: 802.11 b, g, n.
Connect with Bluetooth wireless
Turn Bluetooth power on/off
Find it: swipe up
>
Settings > Connected devices > Bluetooth, then tap the
switch to turn it on
When Bluetooth is on, your phone automatically reconnects to available devices it has
used before. Turning Bluetooth on also lets other devices find your phone.
Note: you can also turn Bluetooth on and off in
Tip: to extend battery life or stop connections, turn Bluetooth off when you're not using
it.
Connect devices
The first time you connect a Bluetooth device, follow these steps:
1 Make sure the device you are pairing with is in discoverable mode (for details, refer to
the guide that came with the device).
2 Swipe up
>
Settings > Connected devices > Bluetooth.
3 With Bluetooth turned on, tap a found device to connect it (if necessary, tap PAIR
or enter a passkey such as 0000). You can tap
what the device will be used for.
When the device connects, the Bluetooth connected indicator
of the screen.
To automatically disconnect or reconnect a device, just turn the device off or on.
Note: using a mobile device or accessory while driving may cause distraction and may
be illegal. Always obey the law and drive safely.
Connect, share & sync
Quick
settings.
to rename the device and choose
appears at the top