diLUSSO TH619DSL Руководство пользователя и инструкция по установке - Страница 5
Просмотреть онлайн или скачать pdf Руководство пользователя и инструкция по установке для Вентиляционная вытяжка diLUSSO TH619DSL. diLUSSO TH619DSL 16 страниц. Telescopic hood
Печатать страницуSpecifications
Input
Absorption
Lamps
Total Power
Vent System Requirements
Vented system must be terminated to the outside. Ductwork can extend either through
the wall or the roof. Do not terminate the vent system in an attic or other enclosed ar-
ea.
The length of the ductwork and the number of elbows should be kept to minimum to
provide efficient performance. The size of the ductwork should be uniform. Do not
install two elbows together. Use duct tape to seal all joints in the ductwork system. Use
caulking to seal exterior wall or floor opening around the cap.
Flexible ductwork is not recommended. Flexible ductwork creates back pressure
and air turbulence that greatly reduces performance.
Make sure there is proper clearance within the wall or floor for exhaust duct before
making cutouts. Do not cut a joist or stud unless absolutely necessary. If a joist or stud
must be cut, then a supporting frame have to be constructed.
TH619DSL
: 220-240V~
/ 50-60 Hz
: 130W
: 2 x 2W
: 134W
TH919DSL
220-240V~
/ 50-60 Hz
130W
2 x 2W
134W
5
TH633DSL
220-240V~
/ 50-60 Hz
260W
2 x 2W
264W
TH933DSL
220-240V~
/ 50-60 Hz
260W
2 x 2W
264W