Motorola CLS1110 Руководство пользователя - Страница 16
Просмотреть онлайн или скачать pdf Руководство пользователя для Двухстороннее радио Motorola CLS1110. Motorola CLS1110 30 страниц. Cls series two-way radio
Также для Motorola CLS1110: Руководство пользователя (17 страниц)
Печатать страницу
Programming the Interference Eliminator Code
The interference eliminator code helps minimize interference by providing code
combinations that filter out static, noise, and unwanted messages.
1. In programming mode, press
number flashes.
2. Press [ or ] to select the code (see page 42).
3. Press and hold Push to Talk to exit programming mode, or press
to continue programming.
S
Programming the Available Channels (CLS1410 only)
If you need fewer channels, you can reduce the number of available channels.
1. In programming mode, press
number flashes.
2. Press [ or ] to select the number of channels you want
available.
3. Press and hold Push to Talk to exit programming mode, or press
to continue programming.
S
Note: The radio retains settings for channels made unavailable.
Programming Call Tones and VibraCall
Your radio can transmit call tones to other radios in your group so you can alert them
that you are about to talk. Your radio is programmed at the factory with call tones
turned off (set to 0), but you can change this setting to choose a distinctive call tone.
®
The VibraCall
feature is an additional call tone option that makes the CLS1410 radio
vibrate briefly when it receives if you have not transmitted or received in the last
30 seconds. Select call tone 4 to turn VibraCall
®
VibraCall
is on.
1. In programming mode, press
2. Press [ or ] to hear and select the call tone. Select call tone 4
®
for VibraCall
3. Press and hold Push to Talk to exit programming mode, or press
to continue programming.
S
To transmit your call tone, press B on the side of the radio.
30
until y displays and the code
S
until = displays and the channel
S
until E displays.
S
(CLS1410 only).
®
(CLS1410 only)
®
on. i displays on the radio when
29