Motorola CP150TM Руководство пользователя - Страница 19

Просмотреть онлайн или скачать pdf Руководство пользователя для Двухстороннее радио Motorola CP150TM. Motorola CP150TM 44 страницы. Commercial series

GETTING STARTED

If a battery is new, or its charge level is very

low, you will need to charge it before you can

use it. When the battery level is low and the

radio is in transmit mode you will see the LED

indicator flash red. Upon release of the PTT

button, you will hear an alert tone.

Note: Batteries are shipped uncharged from

the factory. Always charge a new

battery 14 to 16 hours before initial

use, regardless of the status indicated

by the charger.

Note: Do not use the wall charger and

desktop charger at the same time

when charging.

Note: Do not use the wall charger if using

lithium-ion (Li-Ion) or nickel-metal hyride

(NiMH) batteries. The wall charger is for

nickel-cadmium (NiCd) batteries only.

To Charge the Battery

Turn the radio off.

Lift the dust cover to expose the audio

accessory connector.

Insert the charging adapter into the

accessory connector.

Plug the charging adapter into an electrical

outlet.

•

The LED on the charging adapter lights

Red while the charger is plugged into an

electrical outlet.

Note:

Do not leave the charger connected

to the radio when it is not connected

to the electrical outlet.

Unplug the charger from the electrical outlet

and radio after 10 hours.

Note:

After the initial charge of 14 to 16

hours, do not charge the battery

more than 10 hours.

English