Motorola GP140 Series Руководство пользователя - Страница 15
Просмотреть онлайн или скачать pdf Руководство пользователя для Двухстороннее радио Motorola GP140 Series. Motorola GP140 Series 20 страниц. Professional radio, power distribution and controller
Также для Motorola GP140 Series: Информация о сервисе (32 страниц), Информация о сервисе (30 страниц), Базовое руководство по обслуживанию (46 страниц), Информация о сервисе (30 страниц)
Печатать страницу
Recycling or Disposal of Batteries
At the end of its useful life, the NiCd battery
can be recycled. However, recycling
facilities may not be available in all areas.
Motorola endorses and encourages the recycling of all
re-chargeable batteries. Contact your dealer for further
information.
Battery Status
You can check your radio's battery status by
pressing the programmed Battery Gauge button
(battery status is shown by the LED indicator).
Battery
Level
High
Satisfactory
Low
Very Low
NOTE:
If the Battery Gauge indicator does NOT appear,
this indicates that the battery may not be a genuine
Motorola product.
NiCd
LED Indicator
Green
Yellow
Flashing Red
None
Charging your Battery
When the battery level is very low, you need to
recharge the battery before you can continue to use
your radio.
1. Place the radio with the battery attached or the
battery alone in the charger.
2. The charger's LED would indicate the charging
progress.
NOTE:
Because new batteries or batteries that have not
been used for several months could prematurely indi-
cate full charge (solid green LED), charge the batteries
for 14 to 16 hours prior to initial use to achieve optimal
performance.
LED color
Single flash of Green
Successful charger power-up.
Flashing Red*
Battery is unchargeable.
Charger is getting ready to
Flashing Yellow
charge.
Red
Battery is charging.
†
Battery is 90% charged.
Flashing Green
Green
Battery is fully charged.
* Remove the battery from charger and use a pencil eraser to
clean the four metal contacts on the bottom of the battery.
Place the battery back into the charger. If the LED indicator
continues to flash red, replace the battery.
† A standard battery may require one hour to charge to 90%
capacity.
Status
English
13