Motorola GTX Руководство по эксплуатации - Страница 23
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Двухстороннее радио Motorola GTX. Motorola GTX 30 страниц. 900mhz two way mobile radio
Также для Motorola GTX: Руководство пользователя (49 страниц), Руководство пользователя (36 страниц), Руководство по установке (19 страниц), Руководство пользователя (25 страниц)
Печатать страницу
Overview
This section explains, step by step, how to disassemble
and reassemble the GTX/GTX LTR/LTS 2000 radios.
Safety Information
When testing and repairing the GTX/GTX LTR/LTS
2000 radios, observe the handling precautions to pre-
vent unnecessary damage to the GTX/GTX LTR/LTS
2000 radios.
• Minimize handling of static-sensitive compo-
nents and modules.
• Transport and store static-sensitive components
or assemblies in their original containers on a
metal rail. Label any package that contains
static-sensitive components or assemblies.
• Discharge static electricity from the body by
wearing a grounded antistatic wrist strap while
h a n d l i n g t h e s e c o m p o n e n t s . S e r v i c i n g
static-sensitive components or assemblies
should only be done at a static-free work station
by qualified service technicians. Increasing the
humidity in the work area minimizes static elec-
tricity problems.
• Do not allow anything that can generate or hold
a static charge on the workstation surface.
• Keep the component leads shorted together
whenever possible.
• Pick up components by their bodies. Never pick
them up by their leads.
• Do not slide the components over any surface.
• Avoid handling components in areas with a
floor or work surface covering that can generate
a static charge.
• Use a soldering iron connected to earth ground.
• Use only approved, anti-static, vacuum-type
desoldering tools for removing components.
• When removing printed circuit boards (PCBs),
remove the screws in a diagonal pattern to
reduce stress on the boards.
February 1997
Radio Disassembly/Assembly
Radio Disassembly
Battery Removal
1. The battery latch is located at the bottom of the
radio (Figure 1-1). Press and hold the battery
latch towards the front of the radio.
Figure 1-1. Press Battery Latch
2. Press the battery housing against the radio,
while sliding the battery housing down until it
is free of the chassis rails (Figure 1-2).
Figure 1-2. Slide Battery Housing
3. To remove the battery, pull it straight out and
away from the radio.
Chassis Removal
1. Pull the control knobs straight off.
68P02948C90-O
Section 1
Battery
housing
1-1