Dilux AP1013 Руководство пользователя - Страница 5

Просмотреть онлайн или скачать pdf Руководство пользователя для Наружное освещение Dilux AP1013. Dilux AP1013 8 страниц. Decorative lighting – spacing matching series

Печатать страницу

Installation Guide

Trim Recessed

1. Attach strip light at the center of the inner

bottom of aluminum profile.

Slot the place where the profile need to be

installed. The length of the groove is determined by

subtracting 8 mm from the actual length of the

product. It is recommended that the width be 19 mm

and the depth be greater than 6 mm. Also reserve a

DC power cord.

5. Connect the profile cable to the reserved DC

power cable, pay attention to the positive and

negative poles. Put the profile into the slot and press

it.

（AP2507B）

2. Install the front-end cap and PC cover.

4. Apply glass glue on both sides of the groove

6. After the glue is cured, the profile is firmly adhered.

The installation is complete.