Motorola B803 Руководство пользователя - Страница 31

Просмотреть онлайн или скачать pdf Руководство пользователя для Беспроводной телефон Motorola B803. Motorola B803 47 страниц. Dect 6.0 cordless answering system with bluetooth wireless technology
Также для Motorola B803: Краткое руководство по эксплуатации (8 страниц)

Печатать страницу

USING YOUR ANSWERING MACHINE

The answering machine records unanswered calls when it is activated. It can store up to 59

messages within the maximum recording time of 14 minutes. Each message can be up to 4

minutes long. Your personal outgoing messages can be up to 1.5 minutes long.

8.1

Play Messages

In idle:

1. Press <Play/Stop>.

2. The new messages are played from the loudspeaker on the base station in the sequence they

are recorded.

3. During message playback, press below keys to perform the following functions:

<Play/Stop>: Press to stop playing messages or resume playback.

<Skip Backward>: Press once to replay current message from the beginning. Press twice

to playback the

<Skip Forward>: Skip to play the next message.

<Delete>: Delete the current message.

<Up>: Increase the loudspeaker volume by one level (1 to 8).

<Down>: Decrease the loudspeaker volume by one level (1 to 8).

8.2

Delete All Messages

1. Press and hold <Delete> on base to erase all read messages (applicable only when messages

in answering machine are all read, new message(s) will not be deleted.)

8.3

Announcement

This is the message your callers hear on the answering machine. There is only one pre-recorded

outgoing messages in Answer and Record mode, and you can record your own.

Press and hold to start recording the personalized announcement of the current answer mode

after hearing a long beep. Release key to stop recording.

8.4

Memo

You could record your own message in the base answering machine.

Press and hold to start recording a memo after hearing a long beep. Release key to stop memo

recording.

8.5

Set the answer delay

1. Press MENU/SELECT when in idle mode to enter the feature menu.

2. Use DIR / CID to scroll to >SETUP BS.

3. Press MENU/SELECT and DIR / CID to select >ANSWER DELAY.

4. Press MENU/SELECT and DIR / CID to select TOLL SAVER, 2 RINGS, 4 RINGS or 6 RINGS.

5. Press MENU/SELECT to save your preference and return to the feature menu.

NOTE

If Toll Saver setting is selected, the answering machine will pick up after two rings if there are

new messages and after four rings if there are no messages.

8.6

Turn on/off the message alert

If the message alert is turned on, the base will give a short alert beep at the speaker volume set,

when there is a new message recorded on the answering machine.

1. Press MENU/SELECT when in idle mode to enter the feature menu.

2. Use DIR / CID to scroll to >SETUP BS.

3. Press MENU/SELECT and DIR / CID to select >MESSAGE ALERT.

4. Press MENU/SELECT and DIR / CID to select ON or OFF.

previous message.