Motorola C1013LX Руководство пользователя - Страница 2
Просмотреть онлайн или скачать pdf Руководство пользователя для Беспроводной телефон Motorola C1013LX. Motorola C1013LX 2 страницы. Digital cordless telephone with
answering machine
Также для Motorola C1013LX: Руководство (2 страниц)
Печатать страницу6. Services
6.5
Switch Auto clock on / off
If you have subscribed to a Caller ID Service, the date and time will be set on all your
6.1
Call List type
handsets whenever a call is received. This feature can be set to On or Off.
m
You can set the Call list to show All calls or Missed calls only. If All calls is selected, press
1.
Press
d
d
key in idle and you can view all calls lists. If Missed calls is selected, press
key in
d
2.
Scroll
idle and you can view missed call only.
m
m
d
d
3.
Scroll
1.
Press
, scroll
to
Services
and press
.
m
6.6
Registration
2.
The display shows
Call list
type, press
.
m
u
d
Up to 4 handsets can be registered to one base station. Additional handsets must be
3.
Scroll
or
to select
All calls
or
Missed calls
and press
to confirm.
registered to the base before you can use them.
6.2
Area code
•
The instructions described below apply specifically to your C101xLX handset. If
You can set your local area code into the phone. When a number from that area code
you wish to register another manufacturer's handset, the instructions may vary. In
this case, please refer to the manufacturer of the additional handset.
calls only the local number will be displayed and stored. The area code can be up to
3 digits long.
•
The Master PIN is required before you can register or unregister handsets. The
m
m
PIN is 0000.
d
1.
Press
, scroll
to
Services
and press
.
m
6.6.1
Register a handset
d
2.
Scroll
to
Area code
is displayed. Press
.
m
At the base:
3.
Using the keypad enter the area code and press
to confirm.
1.
Press and hold the
6.3
Flash time
which to register a handset.
Depending on your country and network operator, your C101xLX has the flash time
At the handset:
set as 600 ms (Long). It is unlikely that you need to change this setting unless advised
1.
If the handset is not already registered to a base, press
to do so.
m
m
d
2.
Or if the handset is already registered to a base, press
1.
Press
, scroll
to
Services
and press
.
m
d
and press
2.
Scroll
to
Flash time
and press
.
m
u
d
3.
When the display shows PIN, enter the base PIN and press
3.
Press
or
to select Short,
Medium
or
Long
and press
to confirm.
When the handset registers with the base, it is assigned a handset number.
6.4
Dial mode
6.6.2
Un-Register a handset
The default C101xLX dialling mode is suitable for your country and network operator. It
Use one handset to delete another. You cannot delete the handset that you are using.
is unlikely that you should need to change this setting unless advised to do so.
m
m
m
d
1.
Press
1.
Press
, scroll
to
Services
and press
.
m
d
2.
Scroll
to
Dial mode
and press
.
d
m
2.
Scroll
u
d
3.
Press
or
to select
Tone
or
Pulse
and press
to confirm.
3.
Enter the 4 digit master PIN and press
Display shows the first registered handset number.
u
4.
Scroll
Unregistered
8.4
Delete all messages
8.6
Ring delay
m
m
u
d
Select the duration of rings before your answering machine picks up the call. Choose
1.
Press
, scroll
or
to
Answ. Machine
and press
.
m
from 3-8 Rings or In Toll Saver mode:
u
d
2.
Scroll
or
to
Delete all
and press
.
m
•
If you have new messages your phone answers after 3 Rings.
3.
Dispaly shows
Confirm?
press
.
•
If there are no new messages it will answer after 5 Rings. So you have the option to
hang up, saving the time and cost of a call.
8.5
Outgoing messages (OGMs)
•
If the memory is full, it will automatically revert to Answer Only mode.
m
This is the message your callers hear when the answering machine answers the call.
1.
Press
There are two pre-recorded outgoing messages, or you can record your own.
8.5.1
Record also
2.
Scroll to
Ring delay
The pre-set Record also outgoing message, allows your caller to leave a message,
u
3.
Use
or
ie: "Hello, your call cannot be taken at the moment, please leave your message after
8.7
Remote access
the tone'.
Remote access allows you to operate your answering machine and listen to your
8.5.2
Answer only
messages by calling your C101xLX from another phone.
The caller can listen to your announcement but cannot leave a message. The pre-
recorded message is "Hello, your call cannot be taken at the moment, and you cannot
The default setting is Activated.
leave a message, so please call later."
1.
Call your C101xLX . When you hear your outgoing message, press #.
8.5.3
Record, play or delete your own outgoing message
m
m
2.
Enter your 4 digit PIN. The default code is 0000.
d
1.
Press
, scroll
to
Answ. Machine
and press
.
m
- You hear a confirmation beep.
d
2.
Scroll
to
Announcement
and press
.
m
NOTE
u
d
3.
Press
or
to select either
Answer only
or
Record also
and press
.
m
Change this code for increased security, see "PIN" on page 33.
u
d
4.
Scroll
or
to select either Play,
Record
or
Use default
and press
.
3.
After entering your PIN as stated above, use the keypad to operate your C101xLX
5.
If you select
Play
the current OGM will play back.
answering machine.
If you select
Record
once you here the beep speak your message into the
m
Play messages
handset, to end recording press
. The message will automatically play back.
m
Play previous message
If you selected
Use default
the display shows Confirm?, press
to confirm.
Play next message
8.5.4
Select the OGM
m
m
Delete message playing
d
1.
Press
, scroll
to
Answ. Machine
and press
.
m
Switch answering machine ON
d
2.
Scroll
to
Voice answer
and press
.
m
Stop playback
u
d
3.
Press
or
to select either
Answer only, Record also
and press
to confirm.
Switch answering machine OFF
NOTE
If the answering machine is turned off and then turned on via the base unit the settings
will be the same as when it was last switched on.
9.
Because this phone operates on electricity, you should have at least one phone in
NEGLIGENCE) FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE
your home that operates without electricity in case of a power outage.
PRODUCT OR ACCESSORY, OR FOR ANY INDIRECT, INCIDENTAL, SPECIAL OR
CONSEQUENTIAL DAMAGES OF ANY KIND, OR LOSS OF REVENUE OR PROFITS,
10. To avoid interference to nearby appliances, do not place the base of the phone
LOSS OF BUSINESS, LOSS OF INFORMATION OR OTHER FINANCIAL LOSS
on or near a TV, microwave oven, or VCR.
ARISING OUT OF OR IN CONNECTION WITH THE ABILITY OR INABILITY TO USE
CAUTION
THE PRODUCTS OR ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY
To maintain compliance with the FCC's RF exposure guidelines, place the base unit at
BE DISCLAIMED BY LAW.
least 8 inches from nearby persons.
Some jurisdictions do not allow the limitation or exclusion of incidental or
Battery Safety Instructions
consequential damages, or limitation on the length of an implied warranty, so the
above limitations or exclusions may not apply to you. This Warranty gives you specific
•
Do not burn, disassemble, mutilate, or puncture the battery. The battery contains
toxic materials that could be released, resulting in injury.
legal rights, and you may also have other rights that vary from one jurisdiction to
another.
Consumer Products and Accessories
Products Covered
Limited Warranty ("Warranty")
Consumer Products
Thank you for purchasing this Motorola branded product manufactured under license
by Binatone Electronics International LTD ("BINATONE").
What Does this Warranty Cover?
Subject to the exclusions contained below, BINATONE warrants that this Motorola
Consumer Accessories
branded product ("Product") or certified accessory ("Accessory") sold for use with this
product that it manufactured to be free from defects in materials and workmanship
under normal consumer usage for the period outlined below. This Warranty is your
Consumer Products and
exclusive warranty and is not transferable.
Accessories that are
Who is covered?
This Warranty extends only to the first consumer purchaser, and is not transferable.
Repaired or Replaced
SAVE THESE INSTRUCTIONS
Exclusions
What will BINATONE do?
BINATONE or its authorized distributor at its option and within a commercially
Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to
reasonable time, will at no charge repair or replace any Products or Accessories that
normal wear and tear are excluded from coverage.
does not
conform to this Warranty. We may use functionally equivalent reconditioned/
Batteries. Only batteries whose fully charged capacity falls below 80% of their rated
refurbished/ pre-owned or new Products, Accessories or parts.
capacity and batteries that leak are covered by this Warranty.
What Other Limitations Are There?
Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage,
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED
misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.)
WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
to the surface of the product resulting from misuse; (b) contact with liquid, water, rain,
SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE
extreme humidity or heavy perspiration, sand, dirt or the like, extreme heat, or food; (c)
THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED
use of the Products or Accessories for commercial purposes or subjecting the Product
WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED
or Accessory to abnormal usage or conditions; or (d) other acts which are not the fault
IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OF IMPLIED. IN NO EVENT SHALL
of MOTOROLA or BINATONE., are excluded from coverage.
MOTOROLA OR BINATONE BE LIABLE, WHETHER IN CONTRACT OR TORT
Use of Non-Motorola branded Products and Accessories. Defects or damage that
(INCLUDING
result from the use of Non-Motorola branded or certified Products or Accessories
6.7
Restore default settings
You can restore your C101xLX to its default (original) settings.
m
All the handsets that are registered to the base will be retained.
, scroll to
Services
and press
.
m
IMPORTANT
to
Auto clock
and press
.
Resetting your phone to its default setting will delete all entries in the Phonebook and
m
Calls list. All handset and base settings will also be reset.
m
to
On
or
Off
then press
to confirm.
d
1.
Press
, scroll
to
d
2.
Scroll
to
Reset
and press
3.
Confirm?
is displayed. Press
6.8
Default settings
Handset name
Low battery beeps
Docking tone
Key tone
p
Ringer tones
Ringer volume
on the base until the base beeps. You have 120 seconds in
Earpiece volume
Phonebook
m
Calls list
.
m
7. Caller ID and the Calls list
d
scroll
to
Services
m
m
d
. Scroll
to
Register
and press
.
IMPORTANT
m
To use Caller ID, you must first subscribe to the service from your network provider. A
.
subscription fee may be applicable.
To ensure that the caller's name is displayed, make sure you have stored the full
telephone number, including the area code in the phonebook.
Note: If the area code is stored in the phone it will not display the full phone number.
m
d
, scroll
to
Services
and press
.
If the call is is blocked,
Private
m
If the number is unavailable,
to
Unregister
and press
.
If the call is from the operator,
m
If the call is from a payphone,
.
If the call is from a ringback request,
m
d
or
to select the handset you want to delete and press
.
is displayed on the handset screen.
8.8
Remote access on/off and change remote PIN
m
u
d
1.
Press
, scroll
or
d
2.
Scroll
to
Remote access
u
d
3.
Scroll
or
to select Activated,
m
4.
Press
to confirm.
m
If you choose
Change PIN
d
, scroll to
Answ. Machine
and press
.
m
5.
Enter the new PIN and press
and press
. The handset will display the current setting.
m
6.
Re-enter the new PIN.
m
d
to select the number of rings required and press
to confirm.
7.
Press
to confirm.
8.9
Answering machine language
You can change the answering machine voice prompts and default OGM language.
m
d
1.
Press
, scroll
to
Answ. Machine
d
2.
Scroll
to
Voice language
u
d
3.
Scroll
or
to the required language and press
2
1
3
6
7
8
9
or other peripheral equipment are excluded from coverage. Unauthorized Service
or Modification. Defects or damages resulting from service, testing, adjustment,
installation, maintenance, alteration, or modification in any way by someone other
than MOTOROLA, BINATONE or its authorized service centers, are excluded from
coverage.
Altered Products. Products or Accessories with (a) serial numbers or date tags that
have been removed, altered or obliterated; (b) broken seals or that show evidence of
tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-
Motorola branded housings, or parts, are excluded from coverage.
Communication Services. Defects, damages, or the failure of Products or Accessories
due to any communication service or signal you may subscribe to or use with the
Products or Accessories is excluded from coverage.
Length of Coverage
How to Obtain Warranty Service or Other Information?
To obtain service or information, please call:
One (1) year from the date of the products original
US and Canada: 1-888-331-3383
purchase by the first consumer purchaser of the
Email: [email protected]
product.
You will receive instructions on how to ship the Products or Accessories at your expense
Ninety (90) days from the date of the accessories
and risk, to a BINATONE Authorized Repair Center.
original purchase by the first consumer purchaser of
To obtain service, you must include: (a) the Product or Accessory; (b) the original proof
the product.
of purchase (receipt) which includes the date, place and seller of the Product; (c) if a
warranty card was included in your box, a completed warranty card showing the serial
The balance of the original warranty or for ninety (90)
number of the Product; (d) a written description of the problem; and, most importantly;
days from the date returned to the consumer, whichever
(e) your address and telephone number.
is longer.
These terms and conditions constitute the complete warranty agreement between
you and BINATONE. regarding the Products or Accessories purchased by you, and
supersede any prior agreement or representations, including representations made
in any literature publications or promotional materials issued by BINATONE. or
representations made by any agent employee or staff of BINATONE, that may have
been made in connection with the said purchase.
FCC, ACTA and IC regulations
FCC Part 15
This equipment has been tested and found to comply with the requirements for a Class
B digital device under Part 15 of the Federal Communications Commission (FCC)
rules. These requirements are intended to provide reasonable protection against
harmful interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to
7.1
Caller ID
If you have subscribed to a Caller ID Service, you will be able to see your caller's number
on your handset (provided it is not withheld) prior to answering the call. The display can
show the first 16 digits or 14 characters of the phone numbers.
If your caller's name and number are stored in the phonebook and a number match is
found, you will see the caller's name on the display as well.
m
7.2
Calls list
Services
and press
.
m
The Calls list stores details of your last 50 received calls, including the phone number,
.
m
date and time of call.
.
The Calls list also alerts you when you have unanswered calls.
The caller's details are stored in the Calls list whether or not you have answered the call.
The list is shared by all handsets registered to the base. When the list is full, and a new
call is received, the oldest entry will be deleted automatically.
HANDSET Redial list
Empty
ON
PIN code
0000
When you have missed call(s) (incoming calls that you haven't answered) the display
m
ON
Dial mode
Tone
will show
X Missed call(s)
and the
icon will flash on all handsets registered to the base.
ON
Flash mode
Long (600 ms)
Press
to see the callers details.
1
Keypad lock
OFF
7.2.1
View the Calls list
3
Answer machine
On
d
1.
Press
to open the Calls list. If there are no calls in the list, the display shows
1
Answer mode
Record also
List
empty.
Empty
Ring delay
5
•
The most recent number or name if stored in the phonebook is displayed.
Empty
u
d
2.
Press
or
to scroll through the list.
•
If the call was answered,
icon is displayed as you scroll to the entry. If the
b
call was unanswered,
icon is displayed as you scroll to the entry.
•
If the telephone number is longer than 16 digits, u icon is displayed. Press
to see the remaining digits.
m
•
Press
m
to access the option to store the entry in your phonebook.
•
Press
twice to see the time and date of the call.
3.
When viewing a calls list number press
different formats, e.g. YYY-YYYY, AAA-YYY-YYYY or 1-AAA-YYY-YYYY.
will be displayed.
Unknown
will be displayed.
7.2.2
Dial a number in the Calls list
Operator
will be displayed.
d
1.
Press
to open the Calls list.
Payphone
will be displayed.
t
u
d
Ringback
will be displayed.
2.
Scroll
or
to the entry you want.
3.
Press
to dial the displayed entry.
m
9. Help
to
Answ. Machine
and press
.
m
and press
.
The
icon is not scrolling during charge
•
Bad battery contact – move the handset slightly.
Deactivated
or
Change
PIN.
•
Dirty contact – Clean the battery contact with a cloth moistened with alcohol.
m
•
Battery is full – no need to charge.
enter the old PIN and press
.
m
No dialling tone
.
•
No power – check the connections. Reset the phone: unplug and plug back in
the electrical outlet.
•
Batteries are empty – charge the batteries for at least 24 hours.
•
You are too far from the base – move closer to the base.
•
Wrong line cable – use the line cable provided.
m
Poor audio quality
and press
.
•
The base is too close to electrical appliances, reinforced concrete walls or
m
metal doorframes – move the base at least 3 feet away away from any electrical
and press
.
m
appliances.
.
The
icon is blinking or has disappeared
•
Handset is not registered to the base – register the handset to the base.
•
You are too far from the base – move closer to the base.
No ring tone
•
The ring tone is deactivated.
•
Increase the volume.
Caller ID service does not work
•
Check your subscription with your network operator.
A phonebook entry cannot be stored
•
The phonebook is full. Delete an entry to free memory.
No display
•
Try recharging or replacing the batteries.
•
Try disconnecting and connecting the base power supply.
•
If the LED is not lit up, then try disconnecting and connecting the base power
supply.
Unable to register another handset
•
Maximum number of 4 handsets has been reached.
•
The display shows Searching. You must unregister a handset in order to register
a new one.
correct the interference by one or more of the following measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications to this equipment not expressly approved by the party
responsible for compliance could void the user's authority to operate the equipment.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation. Privacy of communications may not be ensured when using
this telephone.
To ensure safety of users, the FCC has established criteria for the amount of radio
frequency energy that can be safely absorbed by a user or bystander according to the
intended usage of the product. This product has been tested and found to comply with
the FCC criteria. Both the Handset may be safely held against the ear of the user. The
telephone base shall be installed and used such that parts of the user's body other than
the hands are maintained at a distance of approximately 20 cm (8 inches) or more.
This Class B digital apparatus complies with Canadian ICES-003.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation
is subject to the following two conditions: (1) this device may not cause interference,
and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
Le present appareil est conforme aux CNR d'Industrie Canada applicables aux
appareils radio exempts de licence. L'exploitation est autorisee aux deux conditions
suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de
l'appareil doit accepter tout brouillage radioelectrique subi, meme si le brouillage est
susceptible d'en compromettre le fonctionnement.
FCC Part 68 and ACTA
This equipment complies with Part 68 of the FCC rules and with technical requirements
adopted by the Administrative Council for Terminal Attachments (ACTA). This Product
Complies With 47CFR PART 68.
The plug and jack used to connect this equipment to premises wiring and the
telephone network must comply with applicable Part 68 rules and technical
requirements adopted by ACTA. A compliant telephone cord and modular plug is
provided with this product. It is designed to be connected to a compatible modular
jack that is also compliant. An RJ11 jack should normally be used for connecting to
a single line and an RJ14 jack for two lines. See Installation Instructions in the User's
Guide.
7.2.3
Save a number from a Calls list number to the phonebook
d
1.
Press
to open the Calls list.
u
d
2.
Scroll
or
to the entry you want.
m
3.
Press
, the display shows View.
m
d
4.
Scroll
to
Save number
and press
.
5.
The display shows
Enter
name.
m
6.
Enter the name and press
. The number is displayed.
m
7.
Edit the number if necessary, then press
. The number is stored.
7.2.4
Delete an entry
d
1.
Press
to open the Calls list.
u
d
2.
Scroll
or
to the entry you want.
m
3.
Press
, the display shows View.
m
b
d
4.
Scroll
to
Delete
and press
. The display shows Confirm?.
m
5.
Press
to confirm or
to cancel.
7.2.5
Delete the entire Calls list
d
1.
Press
to open the Calls list.
m
2.
Press
, the display shows View.
m
b
d
3.
Scroll
to
Delete all
and press
. The display shows Confirm?.
m
4.
Press
to confirm or
to cancel.
8. Using your Answering Machine
Your C101xLX product can digitally record up to 12 minutes of recorded messages. You
can operate your answering machine from:
#
•
the base
to toggle the Calls List between
•
the handset
•
or remotely, from any touch tone telephone.
You will need to set correct date and time so each message is accurately timestamped.
8.1
Switch ON / OFF
o
Via the base
1.
Press
on the base to turn the answering machine on or off.
Via the handset
m
m
d
1.
Press
, scroll
to
Answ. Machine
and press
Noise interference on your radio or television
•
Your base or charger may be too close. Move it as far away as possible.
Answering machine does not record messages
•
Switch the answering machine ON.
•
The memory may be full. If so, you will need to delete some messages.
•
Answer mode may be set to Answer only.
•
Change the mode to Record also.
Cannot access messages remotely
•
Remote access may be switched off.
•
If wrong PIN is entered a beep is played. You can enter the PIN once again.
Cannot record outgoing message
•
The memory may be full. If so, you will need to delete some messages.
Answering machine stops automatically
•
The memory may be full. If so, you will need to delete some messages.
•
The maximum message length is 3 minutes.
10. General information
If your product is not working properly...
1.
Read this User's Guide.
2.
Visit our website: www.motorola.com
3.
Contact Customer Service in the US and Canada at
1-888-331-3383
Email: [email protected]
Important safety instructions
Follow these safety precautions when using your phone to reduce the risk of fire,
electric shock, and injury to persons or property:
1.
Keep all vents and openings of the phone unblocked.
Do not set the phone on a heating register or over a radiator. Ensure that proper
ventilation is provided at the installation site.
2.
Do not use while wet or while standing in water.
3.
Do not use this product near water (for example, near a bath tub, kitchen sink, or
swimming pool).
4.
Do not allow anything to rest on the power cord. Place the power cord so that it
will not be walked on.
The Ringer Equivalence Number (REN) is used to determine how many devices you
may connect to your telephone line and still have them ring when you are called. The
REN for this product is encoded as the 6th and 7th characters following the US: in the
product identifier (e.g., if ## is 03, the REN is 0.3). In most, but not all areas, the sum
of all RENs should be five (5.0) or less. For more information, please contact your local
telephone company.
This equipment may not be used with Party Lines. If you have specially wired alarm
dialing equipment connected to your telephone line, ensure the connection of this
equipment
does not disable your alarm equipment. If you have questions about what will disable
alarm equipment, consult your telephone company or a qualified installer.
If this equipment is malfunctioning, it must be unplugged from the modular jack until
the problem has been corrected. Repairs to this telephone equipment can only be
made by the manufacturer or its authorized agents. For repair procedures, follow the
instructions outlined under the Limited Warranty.
If this equipment is causing harm to the telephone network, the telephone company
may temporarily discontinue your telephone service. The telephone company is
required to notify you before interrupting service. If advance notice is not practical,
you will be notified as soon as possible. You will be given the opportunity to correct
the problem and the telephone company is required to inform you of your right to file
a complaint with the FCC. Your telephone company may make changes in its facilities,
equipment, operation, or procedures that could affect the proper functioning of this
product. The telephone company is required to notify you if such changes are planned.
If this product is equipped with a corded or cordless handset, it is hearing aid
compatible.
If this product has memory dialing locations, you may choose to store emergency
telephone numbers (e.g., police, fire, medical) in these locations. If you do store or test
emergency numbers, please:
•
Remain on the line and briefly explain the reason for the call before hanging up.
•
Perform such activities in off-peak hours, such as early morning or late evening.
m
d
2.
Scroll
to
Voice answer
and press
.
u
d
3.
Press
or
to select either
Answer only, Record also
or
Off
and press
confirm.
8.2
Listening to your messages
Using the base:
P
1.
Press
. If you have new messages they will be played.
2.
If you have no new messages all messages will be played, starting with the oldest
message first.
During playback:
Press s to stop message playback.
>
Press
to play the next message.
<
D
Press
to play the previous message.
Press
to delete the current message.
Using the handset:
m
1.
When you have new messages, the display shows
X new message(s)
icon will flash. Press
to play new messages.
m
u
d
2.
If you have no new messages, press
m
, scroll
or
to
Answ. Machine
press
.
m
3.
Play
is displayed, press
.
4.
The display shows the number of the message being played and the date and
time the message was left will toggle on the screen.
m
5.
During playback press
to display a list of options.
u
d
Use the
or
keys to change the options:
m
•
Repeat
- press
to repeat current message
m
•
Next
- press
to play next message
m
•
Previous
- press
m
to play previous message
e
•
Delete
- press
to delete the current message.
6.
Press
to stop playback and return to standby.
8.3
Adjust the speaker volume
+
You can adjust the base loudspeaker volume from low to high. Press
-
volume, or
to decrease the volume.
.
5.
Never insert objects of any kind into the product vents as that may result in fire or
electric shock.
6.
Unplug this product from the electrical outlet before cleaning. Do not use liquid
cleaners or aerosol cleaners. Use a damp cloth for cleaning.
7.
Do not disassemble this product. If service or repair work is required, contact the
customer service helpline found in this User's Guide.
8.
Do not overload wall outlets and extension cords.
9.
Avoid using during an electrical storm. Use a surge protector to protect the equipment.
10. Do not use this phone to report a gas leak, especially if you are in the vicinity of
the gas line.
CAUTION
To reduce the risk of fire, use only No. 26 AWG or larger UL Listed or CSA Certified
Telecommunication Line Cord.
Unplug this cordless phone immediately from an outlet if:
•
The power cord or plug is damaged or frayed.
•
Liquid has been spilled on the product.
•
The product has been exposed to rain or water. Do not retrieve the handset or
base until after you have unplugged the power and phone from the wall. Then
retrieve the unit by the unplugged cords.
•
The product has been dropped or the cabinet has been damaged.
•
The product exhibits a distinct change in performance.
Installation Guidelines
1.
Read all instructions and save them for future reference.
2.
Follow all warnings and instructions marked on the product.
3.
Do not install this product near a bath tub, sink, or shower.
4.
Operate this phone using only the power source that is indicated on the marking
label. If you are unsure of the power supply to your home, consult with your dealer
or local power company.
5.
Do not place this product on an unstable cart, stand, or table. This product may
fall, causing serious damage to the product.
6.
Adjust only those controls that are covered by the operating instructions.
Improper adjustment of other controls may result in damage and will often
require extensive work to restore the product to normal operation.
7.
Clean this product with a soft, damp cloth. Do not use chemicals or cleaning
agents to clean this phone.
8.
Use only the power supply that came with this unit. Using other power supplies
may damage the unit.
Industry Canada
Operation is subject to the following two conditions: (1) this device may not cause
harmful interference, and (2) this device must accept any interference, including
interference
that may cause undesired operation.
The term "IC: " before the certification/registration number only signifies that the
Industry Canada technical specifications were met.
The Ringer Equivalence Number (REN) for this terminal equipment is 0.0B. The REN
is an indication of the maximum number of devices allowed to be connected to a
telephone interface. The termination on an interface may consist of any combination
of devices subject only to the requirement that the sum of the RENs of all the devices
does not exceed five.
This equipment meets the applicable Industry Canada Terminal Equipment &
Technical Specifications.
Placing the receiver slightly above the ear may result in better performance for hearing
aids with microphones positioned behind the ear.
Specific Absorption Rate (SAR) information
SAR tests are conducted using standard operating positions accepted by the FCC
with the phone transmitting at its highest certified power level in all tested frequency
bands, although the SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the maximum value, in
general, the closer you are to a wireless base station antenna, the lower the power
output. Before a new model phone is a available for sale to the public, it must be tested
and certified to the FCC that it does not exceed the exposure limit established by the
FCC, Tests for each phone are performed in positions and locations (e.g. at the ear)
as required by the FCC. This handset has also been tested and meets the FCC RF
exposure guidelines. Use of other accessories may Non-compliance with the above
restrictions may result in violation of RF exposure guidelines.
m
to
and the
and
to increase the