Motorola C168I - Cell Phone - GSM Руководство по началу работы - Страница 5

Просмотреть онлайн или скачать pdf Руководство по началу работы для Беспроводной телефон Motorola C168I - Cell Phone - GSM. Motorola C168I - Cell Phone - GSM 11 страниц.

Печатать страницу

battery use & safety

IMPORTANT: HANDLE AND STORE BATTERIES PROPERLY TO AVOID

INJURY OR DAMAGE. Most battery issues arise from improper handling of

batteries, and particularly from the continued use of damaged batteries.

DON'Ts

• Don't disassemble, crush, puncture, shred, or otherwise attempt to

change the form of your battery.

• Don't let the phone or battery come in contact with water. Water can get

into the phone's circuits, leading to corrosion. If the phone and/or battery get

wet, have them checked by your carrier or contact Motorola, even if they appear

to be working properly.

• Don't allow the battery to touch metal objects. If metal objects, such as

jewelry, stay in prolonged contact with the battery contact points, the battery

could become very hot.

• Don't place your battery near a heat source. Excessive heat can damage the

phone or the battery. High temperatures can cause the battery to swell, leak, or

malfunction. Therefore:

• Do not dry a wet or damp battery with an appliance or heat

source, such as a hair dryer or microwave oven.

• Avoid leaving your phone in your car in high temperatures.

DOs

• Do avoid dropping the battery or phone. Dropping these items, especially on

a hard surface, can potentially cause damage.

• Do contact your service provider or Motorola if your phone or battery

has been damaged from dropping or high temperatures.

IMPORTANT: USE MOTOROLA ORIGINAL PRODUCTS FOR QUALITY

ASSURANCE AND SAFEGUARDS. To aid consumers in identifying authentic

Motorola batteries from non-original or counterfeit batteries (that may not have

adequate safety protection), Motorola provides holograms on its batteries.

Consumers should confirm that any battery they purchase has a "Motorola Original"

hologram.

Motorola recommends you always use Motorola-branded batteries and

chargers. Motorola mobile devices are designed to work with Motorola batteries.

Specific Absorption Rate Data

SAR Data

This model wireless phone meets the government's

requirements for exposure to radio waves.

Your wireless phone is a radio transmitter and receiver. It is designed

and manufactured not to exceed limits for exposure to radio frequency

(RF) energy set by the Federal Communications Commission (FCC) of

the U.S. Government and by the Canadian regulatory authorities.

These limits are part of comprehensive guidelines and establish

permitted levels of RF energy for the general population. The

guidelines are based on standards that were developed by

independent scientific organizations through periodic and thorough

evaluation of scientific studies. The standards include a substantial

safety margin designed to assure the safety of all persons, regardless

of age or health.

The exposure standard for wireless mobile phones employs a unit of

measurement known as the Specific Absorption Rate, or SAR. The

SAR limit set by the FCC and by the Canadian regulatory authorities is

1.6 W/kg.

Tests for SAR are conducted using standard operating

positions accepted by the FCC and by Industry Canada with the phone

transmitting at its highest certified power level in all tested frequency

bands. Although the SAR is determined at the highest certified power

level, the actual SAR level of the phone while operating can be well

below the maximum value. This is because the phone is designed to

operate at multiple power levels so as to use only the power required

to reach the network. In general, the closer you are to a wireless base

station, the lower the power output.

Before a phone model is available for sale to the public in the U.S. and

Canada, it must be tested and certified to the FCC and Industry

Canada that it does not exceed the limit established by each

government for safe exposure. The tests are performed in positions

If you see a message on your display such as Invalid Battery or Unable to Charge, take the

following steps:

• Remove the battery and inspect it to confirm that it has a "Motorola Original"

hologram;

• If there is no hologram, the battery is not a Motorola battery;

• If there is a hologram, replace the battery and retry charging it;

• If the message remains, contact a Motorola Authorized Service Center.

Important: Motorola's warranty does not cover damage to the phone caused by

non-Motorola batteries and/or chargers.

Warning: Use of a non-Motorola battery or charger may present a risk of fire,

explosion, leakage, or other hazard.

PROPER AND SAFE BATTERY DISPOSAL AND RECYCLING

Proper battery disposal is not only important for safety, it benefits the environment.

Consumers may recycle their used batteries in many retail or service provider

locations. Additional information on proper disposal and recycling may be found on

the Web:

• www.motorola.com/recycling

Warning: Never dispose of batteries in a fire because they may explode.

service & repairs

If you have questions or need assistance, we're here to help.

Go to www.motorola.com/support, where you can select from a

number of customer care options. You can also contact the Motorola

Customer Support Center at 1-800-331-6456 (United States),

1-888-390-6456 (TTY/TDD United States for hearing impaired), or

1-800-461-4575 (Canada).

and locations (e.g., at the ear and worn on the body) reported to the

FCC and available for review by Industry Canada. The highest SAR

value for this model phone when tested for use at the ear is 1.44 W/

kg, and when worn on the body, as described in this user guide, is

0.79 W/kg. (Body-worn measurements differ among phone models,

depending upon available accessories and regulatory requirements).

While there may be differences between the SAR levels of various

phones and at various positions, they all meet the governmental

requirements for safe exposure. Please note that improvements to this

product model could cause differences in the SAR value for later

products; in all cases, products are designed to be within the

guidelines.

Additional information on Specific Absorption Rates (SAR) can be

found on the Cellular Telecommunications & Internet Association

(CTIA) Web site:

http://www.phonefacts.net

or the Canadian Wireless Telecommunications Association (CWTA)

Web site:

http://www.cwta.ca

1. In the United States and Canada, the SAR limit for mobile phones

used by the public is 1.6 watts/kg (W/kg) averaged over one gram

of tissue. The standard incorporates a substantial margin of

safety to give additional protection for the public and to account

for any variations in measurements.

2. The SAR information includes the Motorola testing protocol,

assessment procedure, and measurement uncertainty range for

this product.

•www.rbrc.org/call2recycle/ (in English only)

Disposal: Promptly dispose of used batteries in accordance

with local regulations. Contact your local recycling center or

national recycling organizations for more information on

how to dispose of batteries.