Motorola GM600 Руководство по установке - Страница 3

Просмотреть онлайн или скачать pdf Руководство по установке для Радио Motorola GM600. Motorola GM600 10 страниц. Remote mount kit
Также для Motorola GM600: Руководство по эксплуатации (28 страниц), Руководство пользователя (11 страниц)

Remote Front Housing

Front housing pcb

Pad

Remote mount

front housing

Gasket

Remote cable

To ﬁt the remote front housing:

Remove the control head from the radio using a ﬂat blade screw driver. Insert the screw driver in the recess

between the control head and the radio. Press until the side of the control head releases.

Pull the control head away from the radio. Remove the ﬂex connector from the socket on the control head side.

Take the remote mount front housing and connect the ﬂex connector to the radio front housing PCB. The contact

surface of the ﬂex should be facing the PCB.

Press the front housing onto the radio chassis until the protuding taps on radio chassis snap into the recesses

inside the front housing.

To ﬁt the remote back housing:

Connect the ﬂex to the control head back housing PCB (i.e. original PCB inside control head).

Press the control head onto the remote back housing until it snaps into place.

To install the remote control head into the vehicle:

Position the remote mount bracket in the desired location and mark the positions of the mounting holes,

centrepunch the marked spots and drill a 4 mm Ø hole at each mark. Mount the trunnion with the supplied screws.

Ensure the socket gaskets are in the back of control head and radio front housing and connect the remote mount

cable to both connectors.

Snap the control head into the mounting trunnion and ﬁx it with the wing screws.

68P02900X91

Remote Mount Controlhead Installation

Remote

mount

radio

Flex connector

Flex Connector

Interface

Controlhead

Gasket for

Remote cable

socket

Remote Controlhead

back housing

English

Bracket

remote mount

Gasket Controlhead

PCB Controlhead

Remote Back Housing

1-1