Motorola TALKABOUT T82 Руководство пользователя - Страница 8
Просмотреть онлайн или скачать pdf Руководство пользователя для Портативное радио Motorola TALKABOUT T82. Motorola TALKABOUT T82 24 страницы. Walkie-talkies
Также для Motorola TALKABOUT T82: Руководство пользователя (16 страниц), Руководство пользователя (39 страниц)
Печатать страницу
• The Leader's radio must make this transmission when all the
Members' radios are still in the Easy Pairing mode, otherwise the
transmission will not be picked up.
• On the Leader's radio, user must remember not to release the
button on the first (single) beep, otherwise this radio will become
another Member's radio. If that happens, you can press PTT to
escape, and retry the steps described in #3 again.
Internal Voice Operated Transmission/
Voice Operated Transmission (
Transmission is initiated by speaking into the microphone of
the radio/audio accessory instead of pushing the PTT
button.
L3 = High Sensitivity for quiet environments
L2 = Medium Sensitivity for most environments
L1 = Low Sensitivity for noisy environments
1. Press
Menu until the
display. When audio accessory is connected, the
icon will be shown. The current setting (Off, L1–L3)
flashes.
2. Press
or
to select the sensitivity level.
3. Press the PTT button to exit menu or
set up.
Note: When using iVOX/VOX, there will be a short delay.
Dual Channel Monitor
Enables you to scan the current channel and another
channel alternately.
To set another channel and start Dual Channel Monitor:
1. Press
Menu until the Dual Channel Monitor
appears. The Dual Channel Monitor icon flashes.
6
/
)
icon appears on the
Menu to continue
icon
2. Press
or
to select the channel then press
3. Press
or
to select the Sub-Code.
4. Press the PTT button or wait until time out to activate
Dual Channel Monitor. The screen will alternate between
home channel and Dual Channel Monitor channel.
5. To end Dual Channel Monitor, press
Note: If you set the same channel and Sub-Code as the current channel,
Dual Channel Monitor does not work.
Silent Mode
Silent Mode (Vibrate Alert) notifies you that your radio is
receiving a message. This is useful in noisy environments.
The Vibrate Alert is triggered when you received a call. The
Vibrate Alert is triggered again if there is no activity within 30
seconds after the previous call.
1. Press
Menu until the Vibrate Alert
The current setting will flash.
2. Press
or
to change the setting to On/Off.
3. Press the PTT button to exit menu or
set up.
Keypad Tones
You may enable or disable the keypad tones. You will hear
the key tone each time a button is pushed.
1. Press
Menu until the Keypad Tone
The current setting On/Off will flash.
2. Press either
or
to turn On/Off.
3. Press the PTT button to confirm or
set up.
Menu.
Menu.
icon is displayed.
Menu to continue
icon appears.
Menu to continue