Epson TM-H6000 Руководство пользователя - Страница 10

Просмотреть онлайн или скачать pdf Руководство пользователя для Изготовитель этикеток Epson TM-H6000. Epson TM-H6000 15 страниц. How to connect printer with a wireless adapter
Также для Epson TM-H6000: Брошюра (1 страниц), Технические характеристики (2 страниц), Руководство пользователя (15 страниц), Руководство (13 страниц), Руководство по эксплуатации (12 страниц)

English

1. Wait until the SLIP light blinks. Then insert the check face up,

with the right side of the check against the right side of the

paper guide as far as it will go. Be sure that the MICR

characters are on the right.

MICR

characters

on this side

face up

2. The printer will detect the check and start drawing it in. When

the printer starts drawing it in, let go of the check immediately.

When the printer ejects the check and the SLIP light starts

blinking again, remove the check by pulling it straight up; do

not pull it at an angle.

Cleaning the MICR Mechanism

Approximately every 12 months, clean the MICR head with a

moistened cleaning sheet.

Use the following or an equivalent commercially available cleaning

sheet:

PRESAT brand (KIC) "CHECK READER CLEANING CARD."

Note:

Be sure not to use an adhesive cleaning sheet.

Follow the steps below:

1. Load a paper roll in the printer, turn off the power, then open

the paper roll cover and turn the power back on while holding

down the RELEASE button.

8 TM-H6000 User's Manual