Epson TM-T88 ReStick Руководство по эксплуатации - Страница 7
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Изготовитель этикеток Epson TM-T88 ReStick. Epson TM-T88 ReStick 12 страниц. How to connect printer with a wireless adapter
Также для Epson TM-T88 ReStick: Технические характеристики (2 страниц), Технические характеристики (8 страниц), Руководство (13 страниц)
How to connect an Epson wireless POS printer
If you are using a wireless router then you should verify that the printer is connected to the router.
Pinging the Printer
You can verify the printer is connected to the computer by pinging the printer from the computer.
Open up a command window and enter:
ping <IP_address>
where <IP_address> is the IP address of the printer
The printer should reply to ping requests. Repeated timeouts indicate that the printer is not connected. If the printer does
not reply verify the IP address of the printer and the Ping setting on the
Configuring the Adapter with TMNet
Running the TMNet configuration utility on the Computer
You can run the TMNet configuration utility on your computer to view or change the settings on the wireless card. This
utility will scan for the wireless printers on your network and allow you to make changes to the adapter's settings.
To obtain the TMNet configuration utility from
http://www.beaglehardware.com/howtowireless.html[3/4/2011 12:28:11 PM]
Turn the printer on
Log onto the router administration from a computer on the network.
Check the wireless device status
Verify that the printer is communicating with the router by finding the IP address or MAC address of the printer in
the wireless device connection list on the router. If the device is not listed see the troubleshooting steps below.
1. You may have to re-enable your wired LAN port to download the EpsonTMNetWinConfig utility.
2. Download and Install Epson's TMNetWinConfig available from
WILL be REQUIRED
3. You
4. If you do not have a log in, you will be required to register for this service (this is free and takes
Look for IP or MAC address of adapter on router
(i.e. 192.168.192.168).
Epson's
website:
to log in to access these drivers.
Wireless adapter
properties.
www.epsonexpert.com