Epson TM-T88IV ReStick Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Изготовитель этикеток Epson TM-T88IV ReStick. Epson TM-T88IV ReStick 9 страниц. Receipt restick printer in windows using an ethernet connection
Также для Epson TM-T88IV ReStick: Брошюра (2 страниц), Технические характеристики (2 страниц), Руководство пользователя (15 страниц), Техническая записка (8 страниц), Пошаговое руководство по установке (14 страниц), Технический бюллетень (5 страниц), Руководство (10 страниц), Руководство пользователя (20 страниц)

Control Panel

FEED button

This button feeds paper.

(Power) LED

This LED is on when the printer is on.

ERROR LED

This indicates an error.

WARNING:

If an accident occurs with the power

switch cover attached, unplug the power

cord immediately. Continued use may

cause fire or shock.

The enclosed power switch cover ensures

that the power switch is not pressed

accidentally. To use this cover, install it as

shown in the illustration on the right.

These instructions apply if a connector cover is packed with your printer to

protect your cables. To attach it, follow the steps below:

1. First, connect all the cables. The

connector cover has three

possible cable exits: on the right,

left, and back.

2. Position the two hooks on the

connector cover so that they

hook the printer case, as shown

in the illustration on the right.

3. Push the connector cover down

to click onto the printer case

To remove the connector cover, turn

the printer over, and push the

connector cover down while

pushing both sides of the connector

cover inward to detach the hooks

from the printer case.

PAPER OUT LED

On indicates a paper out, and when

you select to use thermal roll paper

by DIP Switches, also indicates a

paper near end. (For DIP Switch

settings, See Table B on page 7.)

Flashing indicates standby.

Bottom of the printer

Hooks