Epson 1640XL - Expression Graphic Arts Начните здесь Руководство - Страница 8

Печатать страницу

Epson 1640XL - Expression Graphic Arts Начните здесь Руководство

Problems?

First, check the lights on the scanner.

READY

ERROR

READY

If your problem is listed here, try these suggestions. For more information,

see your software Help or your User's Guide.

The New Hardware

Wizard appears on

your screen.

You see an error message

that EPSON Scan cannot

be started.

The scanner doesn't scan

your image.

An error message says the

selected area is too large

for this resolution.

The printed image

doesn't look the same

as the original.

The printed image

is larger or smaller

than the original.

EPSON is a registered trademark of SEIKO EPSON CORPORATION. EPSON Expression is a registered

trademark, and EPSON Store and SoundAdvice are service marks of Epson America, Inc.

General Notice: Other product names are for identification purposes only and may be trademarks of

their respective owners. EPSON disclaims any and all rights in those marks.

Printed in USA

Flashing green

Green

Flashing red

Off

Warming up or scanning.

Ready to scan.

Make sure that the transportation lock is

set to the

unlocked position and the

scanner is securely connected to your

computer. Try restarting your computer and

turning the scanner off and then on again.

If the ERROR light is still flashing, contact

your dealer or EPSON.

Make sure your scanner is plugged in to a

working outlet and turned on.

If you have not yet installed the software,

click Cancel and disconnect the scanner.

Follow the steps on the other side of

this sheet.

Make sure your scanner is on. If it was off,

turn the scanner on first, then restart your

computer before you try to scan.

Make sure the scanner's power plug is

connected to a working outlet.

Wait until the green READY light stops

flashing and remains on, then try again.

Make sure your cable is securely connected.

If you have a USB connection, use the USB

cable that came with the scanner.

If you're using a USB hub, connect the

scanner directly to one of the USB ports

on your computer.

Make sure the transportation lock is in the

unlocked position.

If you're using a SCSI connection, make

sure the SCSI ID switch on the back of the

scanner is not set to the asterisk (*). Make

sure it's set to a number that doesn't conflict

with any other SCSI devices. If you reset the

SCSI ID switch, turn the scanner off and then

on again.

If you're importing your image into a TWAIN-

compliant application like Photoshop, make

sure you select EPSON Expression 1640XL

as your import source.

Close any programs you don't need. Also,

try scanning at a lower resolution, or select

part of the image to scan. If you're running

Mac OS 8.6 to 9.x, increase the memory of

your host application.

If the scanner glass is smudged or dusty,

turn the scanner off and unplug the power

cord. Wipe the glass with a soft, dry cloth.

If your original document is dirty or wrinkled,

it will show up in your scan. If the document

is not aligned correctly (see "Your First

Scan"), straight lines may come out jagged,

or your printed image may look crooked.

Try printing a test page to make sure your

printer is operating correctly.

Because your monitor and printer use

different color technologies, your printed

colors can't match the colors on your

screen exactly.

You can't judge the size of the printed image

by what you see on your screen. The Target

Size setting in EPSON Scan, or the image

size setting in Photoshop or other TWAIN-

compliant software, determines the size of

the printed image.

CPD-17255