Epson 1705C - PowerLite XGA LCD Projector Краткое руководство по эксплуатации - Страница 3

Печатать страницу

Epson 1705C - PowerLite XGA LCD Projector Краткое руководство по эксплуатации

"Wireless"

NOTES:

Make sure the wireless module and the Easy MP (EMP

NS Connection) software has been installed and that the

projector is configured for our network.

Your computer must have a wireless card or built

wireless connection.

1. Turn on the projector and adjust the image

Turn on the projector and adjust the image

as described earlier.

2. Press the Source Search button on the

projector and use the directional arrow

button to select Easy MP or press

on the projector's remote control.

The projector displays a screen like this:

3. From the start menu or desktop shortcut,

From the start menu or desktop shortcut,

select EMP NS Connection.

If you see this screen:

Select "Advanced Connection Mode

"Set the selected Connection Mode as the

Set the selected Connection Mode as the

default mode for future connections."

Click OK.

or built-in

button on the

or press Easy MP

Connection Mode" and

4. If you see this screen,

If you see this screen, click Yes.

5. You see this screen:

Once the name of your projector appears,

select it and click Connect

Connect.

• If a projector is "in use" and

If a projector is "in use" and

"locked" to prevent interruption,

you won't be able to select it.

• If you see a message asking for a

If you see a message asking for a

keyword, enter the four digits that

appear on the Easy MP Network

appear on the

Screen and click

and click OK.

You see the image on your monitor

transmitted to the projector and a floating

transmitted to the projector and a

control bar appears on the computer

screen.

You can minimize this control bar to the

task bar.

When you're finished with your

presentation, click Disconnect

control bar.

Press the power button twice to turn off.

Disconnect on the