Epson 1925W - POWERLITE Multimedia Projector Руководство по эксплуатации - Страница 43

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Программное обеспечение Epson 1925W - POWERLITE Multimedia Projector. Epson 1925W - POWERLITE Multimedia Projector 47 страниц. Epson powerlite 1925w projector
Также для Epson 1925W - POWERLITE Multimedia Projector: Руководство по быстрой настройке (4 страниц), Руководство пользователя (1 страниц), Технические характеристики (4 страниц), Инструкции по обновлению (4 страниц), Декларация о соответствии (4 страниц), Список деталей (1 страниц), Брошюра и технические характеристики (4 страниц), Руководство пользователя (25 страниц), Руководство по обновлению (8 страниц), Руководство пользователя (25 страниц), Руководство по установке (3 страниц)

Application lock function

You can use the application lock to prevent third parties from operating

the projectors using EasyMP Monitor and from changing settings

without authority. Opening and closing EasyMP Monitor and status

monitoring can still be carried out even when the application lock is

applied.

In addition, when a password has been set, the password must be entered

in order to cancel the application lock. This ensures that the application

lock can not be easily cancelled, and thus improves system security.

Switching Application lock between enabled and

disabled

Procedure

Select "Application lock" from the Tool menu.

The application lock will be enabled and no operations will be possible

other than opening and closing EasyMP Monitor and disabling the

application lock.

Procedure

Select "Application unlock" from the Tool menu.

The password entry window will be displayed, so enter the

set password and then click "OK".

If no password has been set (default setting), click OK without en-

tering a password. It is recommended that you enter a password in

order to strengthen security.

The application lock will be cancelled and operations can be carried

out as normal.

Carry out the following operations while application lock is cancelled.

Procedure

Select "Environment setup" from the Tool menu.

The Environment setup window will be displayed.

Select "Change the application lock password".

Enter the password in both the "New password" and "New

password (confirm)" boxes and then click "OK".

The password can be up to 16 bytes in length. Single-byte alphanu-

meric characters can be used.