Epson 7800p - PowerLite XGA LCD Projector Руководство по информации о продукте - Страница 7

Просмотреть онлайн или скачать pdf Руководство по информации о продукте для Программное обеспечение Epson 7800p - PowerLite XGA LCD Projector. Epson 7800p - PowerLite XGA LCD Projector 22 страницы. Release of emp ns connection for windows & mac upgrade from v2.50 to v2.51
Также для Epson 7800p - PowerLite XGA LCD Projector: Руководство пользователя (42 страниц), Руководство по эксплуатации (36 страниц), Быстрая настройка (2 страниц), Запасные части (1 страниц), Руководство по эксплуатации (47 страниц), Руководство по установке (5 страниц), Технический паспорт (2 страниц), Технический обзор (7 страниц), Бюллетень поддержки продуктов (25 страниц), Бюллетень поддержки продуктов (22 страниц), Бюллетень поддержки продуктов (28 страниц), Бюллетень поддержки продуктов (41 страниц), Бюллетень поддержки продуктов (15 страниц), Бюллетень поддержки продуктов (22 страниц)

Печатать страницу

Epson 7800p - PowerLite XGA LCD Projector Руководство по информации о продукте

EPSON PowerLite 7800p Projector

You see the currently selected source displayed in the main

window, as shown below. All other sources (including the

currently selected source) are displayed in smaller preview

windows on the right side and at the bottom.

Currently selected source

Computer (Analog-RGB)

BNC

Video

If no equipment is connected to a port, or if there is no

incoming signal, the preview window for that source

appears blank.

Note: Movies are displayed as still images on the preview

screen.

2. Press the corresponding

control to switch to the desired source. Or press the

button to exit the preview screen without switching sources.

Note: A red highlight surrounds the preview window for the

currently selected source. You can use the

the remote control to highlight a different source, and then press

to display it.

Enter

Troubleshooting Display Problems

You Can't Project an Image

If you see a blank screen or a blue screen with the

message, try the following:

Make sure the cables are connected correctly.

Make sure the P power light is green and not flashing and

the lens cover is off.

If you've connected more than one computer and/or video

source, you may need to press one of the

on the projector's control panel or the remote control to

select the correct source. (Allow a few seconds for the

projector to sync up after pressing the button.)

If you're using a PC laptop, press the function key on your

keyboard that lets you display on an external monitor. It

may be labeled

CRT/LCD

You may have to hold down the

Allow a few seconds for the projector to sync up after

changing the setting.

EPSON PowerLite 7800p Projector

Computer

DVI

S-Video

Preview windows

buttons on the remote

Source

pointer button on

No Signal

buttons

Source

or have an icon such as

key while pressing it.

The Projector and Laptop Don't Display

the Same Image

If you're projecting from a laptop, and you don't see the same

image on the projection screen and on your computer screen,

follow these guidelines.

If you're using a PC laptop:

On most systems, there's a function key that lets you toggle

between the LCD screen and the projector, or display on

both at the same time. It may be labeled

an icon such as

key while pressing it. Allow a few seconds for the projector

to sync up after changing the setting.

If the function key doesn't permit you to display

simultaneously on both screens, you should check your

monitor settings to make sure both the LCD screen and the

external monitor port are enabled. From the Control Panel,

open the

box, click the

method for adjusting the settings varies by brand; you may

need to click a

Monitor port is set as your primary display and/or enabled.

See your computer's documentation or online help for

details.

ESC

If you're using Macintosh OS X:

You may need to set up your system to display on the

projector screen as well as the LCD screen. Follow these steps:

1. From the Apple menu, select

select

Displays

2. Make sure the

3. Click the

4. Make sure the

5/03

. You may have to hold down the

utility. In the Display Properties dialog

Display

tab, then click

Settings

tab, then make sure the external

Monitor

System Preferences

dialog box is selected.

VGA Display

tab.

Arrange

Make sure Mirror Displays is checked

checkbox is selected.

Mirror Displays

or with

CRT/LCD

. The

Advanced

, then

Select the

VGA Display

dialog box

Click the

Arrange tab