Epson 830p - PowerLite XGA LCD Projector Руководство пользователя - Страница 8

Печатать страницу

Epson 830p - PowerLite XGA LCD Projector Руководство пользователя

Epson PowerLite 830p

Note: The image will be slightly smaller after adjusting. If it's

important to maintain the correct aspect ratio, use the menu

system to perform keystone correction, then use the remote's

button to adjust the aspect ratio.

Resize

Press the

button on the remote control, select the

menu, and press

Setting

select

and press

Keystone

press

, then select

Enter

Select

(for vertical keystone distortion) or

V-Keystone

(for horizontal keystone distortion) and press

Keystone

. Use the

pointer button on the remote control to

Enter

adjust the keystone setting as needed.

Using Quick Corner

If your projected image has no parallel sides, you can even up

the sides using Quick Corner. Follow these steps:

1. Press the

button on the remote control (or on the

projector's control panel).

2. Select the

menu and press

Setting

Note: If you are already using Keystone settings, you see a

warning message. To disable keystone settings and use Quick

Corner instead, press

Enter

3. From the Setting menu, select

4. Select

and press

Quick Corner

You see this screen:

Epson PowerLite 830p

Keystone

buttons

. From the Setting menu,

Enter

, select

Enter

H/V Keystone

and press

Horiz./Vert./Height

Enter

; to keep your settings, press

and press

Keystone

Enter

5. Press the

adjust.

6. Use the

and

arrow buttons on the projector) to adjust the shape.

Enter

Note: If you are not satisfied with the corrections made, press

H-

the

Esc

shape.

7. Repeat steps 5 and 6 as needed to adjust any remaining

corners.

8. When you're done, press the

control or projector's control panel to exit the menu

system.

Quick Corner

Quick Corner screen appears whenever you press the

projector's keystone buttons. You can then follow steps 5

through 8 above to correct the shape of your image or press

to exit Quick Corner.

Esc

Correcting Computer Images

Enter

If you're connected to a computer and the image doesn't look

right, press the

Note: You must be projecting an image for this button to have any

effect. The

Auto

10/04

button to select the corner you want to

Enter

pointer button on the remote control (or the

button for one second to reset the screen to its original

button on the remote

Esc

remains selected in the Keystone menu, the

button on the remote control.

Auto

button works only with computer images.