Epson BrightLink 455Wi Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Программное обеспечение Epson BrightLink 455Wi. Epson BrightLink 455Wi 10 страниц. Remote control information
Также для Epson BrightLink 455Wi: Брошюра и технические характеристики (20 страниц), Начните здесь Руководство (6 страниц), Руководство по эксплуатации (47 страниц), Руководство пользователя (8 страниц), Руководство пользователя (7 страниц), Бюллетень поддержки продуктов (5 страниц), Монтажный шаблон (5 страниц), Руководство пользователя (25 страниц), Брошюра и технические характеристики (6 страниц)

Epson BrightLink 450Wi / 455Wi

note

If a button is stuck down for

longer than 30 seconds, the

remote control stops

operating to conserve battery

power. When you release the

button, normal operation

resumes.

Using the remote control

under bright uorescent

lamps or in direct sunlight

may a ect projector

response.

Using the Remote Control

Make sure batteries are installed . Follow

these tips for using the remote control:

Point the remote control at the projector or at the screen.

Stand within 19.7 feet (6 meters) of the projector.

Aim the remote control within 30° to the side of, or 15° above or

below, the remote control receivers on the projector.

Controlling the Picture and Sound

You can use the remote control to temporarily turn o the picture and

sound, freeze the action, zoom in on the picture, and adjust the

volume.

Turning Off the Picture and Sound

Press the

button on the remote control to turn o the

A/V Mute

image and sound, and darken your screen. This is useful if you want to

temporarily re-direct your audience's attention without the distraction

of a bright screen.

A/V Mute button

To turn the image and sound back on, press the button again.

You can create an image, such as a company logo or picture, to display

on the screen whenever you press the

INSTALLATION HANDBOOK

Remote Control Information

button.

A/V Mute