Epson ChromaBlast 1.0 Руководство пользователя - Страница 9
Просмотреть онлайн или скачать pdf Руководство пользователя для Программное обеспечение Epson ChromaBlast 1.0. Epson ChromaBlast 1.0 13 страниц. For epson stylus pro 4880
Также для Epson ChromaBlast 1.0: Руководство по началу работы (47 страниц)
Печатать страницу
Changing Menu Settings
You can use the buttons on the projector or remote control to
display the menus and change settings.
1. Press the
button on the projector or remote control.
Menu
You see a screen similar to the one below (the screen you see
depends on the equipment you've connected):
The four menus are shown on the left, and the options
available to the highlighted menu are shown on the right.
Note: If nothing is connected to the projector, some options
may not be available.
2. Press the up or down arrow button on the remote control or
the
or
button on the projector's control panel to
move to the menu you want. When your menu is
highlighted, press the
Select
the selected menu on the right. The highlight moves to the
first option on the list.
3. Press the up or down arrow button on the remote control or
the
or
button on the projector's control panel to
move through the list of options. When the option you want
to change is highlighted, press the
You may see a list of settings, a submenu providing
additional options, or a line menu or slider bar similar to the
one below:
4. If you see a list of settings, use the arrow buttons on the
remote control or the
control panel to move to the setting you want, then press the
button. Enabled settings are indicated by a green
Select
light, while disabled ones are gray.
If an option has a submenu, press the
display it, then select the setting you want.
button. You see the options for
button.
Select
or
button on the projector's
button to
Select
EPSON PowerLite Home 10 Projector
If you see a line menu or slider bar, press the left or right
arrow button on the remote control, or the
on the projector to change the setting.
5. Press the
button to return to the previous menu.
Esc
6. Press the
button to exit the menu system.
Menu
Replacing the Remote Control Battery
When the battery in the remote control runs out, follow the
steps below to replace it. You'll need a CR2025 lithium battery,
which you can obtain commercially.
1. Press the catch in as you pull the battery holder out
Press here and slide
out battery holder
2. Remove the old battery and insert the new one. Make sure
+
the
side of the battery is facing up, as shown.
Old battery
3. Slide the battery holder back
into the remote control until it
clicks into place.
Caution:
When replacing the battery, follow these guidelines:
❑ Replace the battery as soon as it runs out.
❑ If the battery leaks, wipe away battery fluid with a soft cloth. If
fluid gets on your hands, wash them immediately.
❑ Remove the battery if you will not be using the remote for a
long period of time.
❑ Dispose of the used battery in accordance with local
regulations.
7/03
EPSON PowerLite Home 10 Projector - 9
or
button
New battery