Epson ColorBurst RIP Бюллетень поддержки продуктов - Страница 3
Просмотреть онлайн или скачать pdf Бюллетень поддержки продуктов для Программное обеспечение Epson ColorBurst RIP. Epson ColorBurst RIP 17 страниц. Image clipping update for stylus pro 4000
Также для Epson ColorBurst RIP: Начало работы (13 страниц), Руководство по началу работы (10 страниц)
Печатать страницу
Note:
With the Auto Center option selection, if your image size is larger then the actual printable area
supported by the printer hardware some clipping may still occur in the image length, approximately
1/16 of an inch. The printer always has a fixed bottom margin of .56 inches. If you are printing an
8x10 image on an 8.5x11 page auto centering will clip part of the image lengthwise in order to center
the image top to bottom. To avoid clipping the image you must select Manual Position under Image
Offset and also uncheck auto centering option under your application and set the margins manually.
You may have to set the top margin in your application to .25" to get the full 8x10 image to print.
6. Now you are ready to send the job from your application or drag and drop into the hot folder.
PC Windows XP/2000 Instructions
No updated software is required to correct the image clipping issue under Windows XP/2000. However the
following changes have to be made.
1. Setup your print jobs as normal from your applications. Select ColorBurst as your printer driver.
Select the page size that you want to print on. This can be a predefined page size or a custom page
size.
2. Launch the ColorBurst Rip on the server computer. Once the ColorBurst Rip windows is up and
running go to Options menu then select Printer Options.
3. Under Page Setup select User page dimensions option and enter the page width and height
dimensions.
4. Select Position upper left corner of job option. This option does not center the image, but it will
allow to print the full image without clipping. Click on OK to close the window.