Epson EasyMP Multi PC Projection Руководство по эксплуатации - Страница 33

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Программное обеспечение Epson EasyMP Multi PC Projection. Epson EasyMP Multi PC Projection 46 страниц. Epson easymp multi pc projection operation guide
Также для Epson EasyMP Multi PC Projection: Руководство по эксплуатации (47 страниц), Руководство по эксплуатации (48 страниц), Руководство по эксплуатации (49 страниц)

Solving Problems

Check

Is the DHCP function for Wired LAN turned On?

Are connection denial functions, such as MAC Address

restrictions and port restrictions, set correctly at the access point?

Are the IP address, the subnet mask, and the gateway address for

the access point and the projector set correctly?

Cannot connect the projector and the computer via the network.

Check

Is the Network Configuration screen displayed on the projector?

Is the firewall turned off, or has the firewall been registered as an

exception?

Was the network adapter being used selected correctly with

EasyMP Multi PC Projection?

Are the access point and the projector's subnet different?

Does the projector support the EasyMP Multi PC Projection

version being used?

Turn Off the DHCP setting for Wired LAN from the Configuration Menu before connecting.

When DHCP is set to On in Advanced connection mode, if an available DHCP server is not found, it may take a while

to enter LAN standby status.

See the following manual for more details on the projector's wired LAN settings.

User's Guide

Set the projector to allow connections from the access point.

When not using a DHCP, adjust each setting.

Close network settings on the projector, and return to the LAN standby screen. If the Network Configuration screen is

displayed on the projector, you cannot connect using EasyMP Multi PC Projection.

When you do not wish to turn off the firewall or register the firewall as an exception, make the necessary settings to

open the ports.

The ports used by EasyMP Multi PC Projection are "3620", "3621", and "3629".

If the computer has multiple LAN environments, it cannot connect unless the network adapter is selected correctly.

When using a computer running Windows, start EasyMP Multi PC Projection, and select the network adapter you are

using from Switch LAN in Set options.

s "General Settings Tab"

p.41

Select Manual search from EasyMP Multi PC Projection, and then specify the IP address to connect.

s "Manual search"

p.18

Install EasyMP Multi PC Projection from the EPSON Projector Software CD-ROM supplied with the projector.

Remedy