Epson EMP Monitor Руководство по эксплуатации - Страница 15
Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Программное обеспечение Epson EMP Monitor. Epson EMP Monitor 37 страниц. Emp monitor for projectors
Также для Epson EMP Monitor: Руководство по эксплуатации (11 страниц), Руководство по эксплуатации (12 страниц), Руководство пользователя (42 страниц), Руководство по эксплуатации (34 страниц), Руководство по эксплуатации (14 страниц)
Печатать страницу
Registering and deleting projectors for monitoring
You can also carry out this operation by selecting New - Projector
q
(manual registration) from the Edit menu.
B
Enter the IP address of the projector to be registered in the
"IP address" box and then click "Search". When the message
is displayed, click "OK".
If using a serial
TCP/IP conversion adapter and cable to
W
connect the projector, select Use Serial
adaptor. Enter the port number in Port Number and then click
Search.
TCP/IP conversion
W
C
After searching is complete, enter the information for the
projector to be registered while referring to the table below.
Display name
Enter the name of the projector(s) to be displayed in
Grouping view or Detail list view. Up to a maximum of
32 bytes can be entered. A space cannot be used as the
first character.
Select the icon(s) to be displayed in Grouping view or
Display icon
Detail list view.
Select when registering a projector in a group. If no
Parent group
groups have been created, this cannot be selected.
s "Registering several projectors to a monitoring
group all at once"
This shows the name that has been registered on the
Projector name
projector.
This shows the IP address that you entered in step 2.
IP address
Use Serial W
Select this if using a serial W TCP/IP conversion
adapter to connect the projector.
TCP/IP
conversion
adaptor.
Port Number
If using a serial W TCP/IP conversion adapter to
connect the projector, enter the port number.
If a Monitor Password has been set for the projector, be
Monitor
Password
sure to enter the Monitor Password that has been set. If
the correct password is not entered at this time, it will
not be possible to monitor and control the projector
even though it is registered. If using a serial W TCP/IP
conversion adapter to connect the projector, the
Monitor Password security function cannot be used.
You can enter some kind of memo about the projector.
Description
The details you enter here will be displayed at the
projector properties.
Up to a maximum of 60 bytes can be entered.
Select this when you want monitoring to start.
Monitor
15
p.16