Epson PhotoPC 800 Информация о продукте - Страница 7
Просмотреть онлайн или скачать pdf Информация о продукте для Программное обеспечение Epson PhotoPC 800. Epson PhotoPC 800 15 страниц. Epson photopc 800: product information
Также для Epson PhotoPC 800: Важная информация (1 страниц), Руководство пользователя (24 страниц), Брошюра и технические характеристики (2 страниц)
Печатать страницу
2. Insert the card all the way into the memory card slot. Make
sure the front of the card is facing the front of the camera,
and the arrow on the card's label is pointing down.
3. Close the memory card cover.
Next, you need to format the card. Follow the steps below.
Formatting Your Memory Card
You should format your card before you use it. Follow these
steps:
1. Turn the camera dial to
(below
Memory SETUP
menu appears if a memory card is installed in the camera.
2. Press the top button (next to
to format the card. You see a message warning you that all
data on the card will be deleted if you format it.
3. Press the button next to
button next to
to cancel.
No
Removing Your Memory Card
Turn your camera
before you remove the card.
Off
CAUTION
Never remove the card while the camera is on. Data in the card may
be lost or damaged.
1. Open the memory card cover.
. Then press the
button
W.B.
). The Memory Card Format
MEMORY CARD FORMAT
to format the card, or the
Yes
2. Press the eject button next to the memory card and remove
the card by hand. Then close the cover.
eject button
Using the Display Panel
The display panel shows the camera's current settings and the
number of pictures remaining.
.
sensitivity
white
balance
low
battery
icon
exposure
)
Checking the Picture Counter
The large number in the lower right of the status display panel
shows how many additional pictures you can take.
This number is affected by the image quality setting. Also, if
you have any voice recordings stored on your memory card,
the number on the status display panel may be greater than
the actual number of remaining pictures.
When the memory card is full, the number on the status
display panel reads
camera flashes red, and you can no longer use the shutter
button. Before you can take any more pictures, you need to
delete some of the images on the memory card. If you are
using a higher resolution, you may see one of the following in
this corner of the display panel:
6/99
EPSON PhotoPC 800
image quality
pictures
remaining
, the status light on the back of the
0
EPSON PhotoPC 800
flash
timer
monochrome
indicator
- 7