Operation
1.
Wall Mounted Switches
This model may be installed
so that a wall mounted switch
energizes the firebox and
flame, (On/Off Switch must
be in the ON position). A
wall mounted switch may
also be used to override the
flame image, (On/Off Switch
must be in the ON position
in coordination with any
main power wall mounted
switch). A wall mounted
switch may also be used
to override the heater/Puri-
fire
option (Mode Selector
TM
Switch must be in the "="
position).
2.
Wall Mounted Thermostat
This unit may be installed so
that a wall mounted ther-
mostat can adjust the heat
temperature to your individual
requirements. Please refer
to thermostat manufacturers
operation Instructions. Mode
Selector Switch must be
set to "=" for thermostat to
control heater/Purifire
3.
Wall Mounted Remote Con-
trols (WRCPF-KIT)
Dimplex manufactures a
optional wall mounted remote
control which allows the user
to fully control the fireplace
from a central location with
the added functionality of a
built in thermostat.
Resetting The Tempera-
ture Cutoff Switch
The heater on this fireplace is
protected with a safety device to
prevent overheating. should the
heater overheat, the overheat
indicator will be activated (Fig. 1),
and an automatic cutout will turn
the heater off and it will not come
back on without being reset. It
can be reset by switching the on/
off switch to oFF and waiting 5
minutes before switching it to on.
The overheat cutout will be trig-
gered if the filter is dirty. Follow
filter
CAUTION:
continuously reset the heater, dis-
connect power and call Dimplex
customer service at
(1-888-346-7539).
! NOTE:
a slight, harmless odor when first
.
TM
used. This odor is a normal con-
dition caused by initial heating of
internal heater parts and will not
occur again.
maintenance.
If you need to
The heater may emit
7
Печатать страницу