Toshiba 24S3KHS-IN Руководство пользователя - Страница 3

Просмотреть онлайн или скачать pdf Руководство пользователя для Кондиционер Toshiba 24S3KHS-IN. Toshiba 24S3KHS-IN 12 страниц.

Печатать страницу

Toshiba 24S3KHS-IN Руководство пользователя

PREPARATION BEFORE USE

Preparing Filters

1. Open the air inlet grille and remove the air ﬁ lters.

2. Attach the ﬁ lters. (see detail in the accessory sheet).

Loading Batteries (when use wireless operation.)

1. Remove the slide cover.

2. Insert 2 new batteries (AAA type)

following the (+) and (–) positions.

Clock Setup

1. Push

by tip of the pencil.

If timer indication is ﬂ ashing, go to the next step 2.

2. Press

: adjust the time.

3. Press

: Set the time.

Remote Control Reset

Push

by tip of the pencil or

1. Remove the batteries.

2. Press

3. Insert the batteries.

AIR FLOW DIRECTION

FIX

Press

: Move the louver in the

desired vertical direction.

SWING

Press

: Swing the air

automatically and press again to stop.

For horizontal direction, adjust manually.

Note:

• Do not move the louver manually by others.

• The louver may automation positioning by some operation mode.

REMOTE CONTROL

1 Infrared signal emitter

2 Start/Stop button

3 Mode select button (MODE)

4 Temperature button (TEMP)

5 Fan speed button (FAN)

6 Swing louver button (SWING)

7 Set louver button (FIX)

8 On timer button (ON)

9 Off timer button (OFF)

! Setup button (SET)

" Clear button (CLR)

# Memory and Preset button (PRESET)

$ One-Touch button (ONE-TOUCH)

% High power button (Hi-POWER)

& Economy button (ECO)

( Quiet button (QUIET)

) Comfort sleep button (COMFORT SLEEP)

~ Filter reset button (FILTER)

+ Set clock button (CLOCK)

, Check button (CHECK)

- Reset button (RESET)

Note:

• The provided Remote Controller is a wireless type, which also can be used as

a wire. Please see "How to Connect The Remote Controller for Wired

Operation", located in installation instruction, in case of wired control is required.

• In wire operation, remote controller will return to initial condition (PRESET,

TIMER and CLOCK will return to initial condition) when user shutdown power

supply of Air conditioner.

ONE-TOUCH

Press the "ONE-TOUCH" button for fully automated operation that is customized

to the typical consumer preferences in your region of the world. The customized

settings control temperature air ﬂ ow strength, air ﬂ ow direction and other settings

to provide you alternate contact with "ONE-TOUCH" of the button. If you prefer

other settings you can select from the many other operating functions of your

Toshiba unit.

ONE-TOUCH

Press

: Start the operation.

1110655141-1_EN_VT.indb 3

To automatically select cooling, heating or fan only operation

1. Press

2. Press

3. Press

1. Press

2. Press

3. Press

For dehumidiﬁ cation, a moderate cooling performance is controlled automatically.

To automatically control room temperature and airﬂ ow for faster cooling or heating

operation (except in DRY and FAN ONLY mode)

To automatically control room to save energy (except in DRY and FAN ONLY mode)

Note: Cooling operation; the set temperature will increase automatically 1 degree/

In case of the misplaced or discharged remote control

SWING

FAN

(

ONE-TOUCH

FIX

QUIET

Hi POWER

COMFORT

SLEEP

)

AUTOMATIC OPERATION

MODE

: Select A.

: Set the desired temperature.

FAN

: Select AUTO, LOW , LOW+

HIGH

COOLING / HEATING / FAN ONLY OPERATION

MODE

: Select Cool

, Heat

: Set the desired temperature.

Cooling: Min. 17°C, Heating: Max. 30°C, Fan Only: No temperature indication

FAN

: Select AUTO, LOW , LOW+

or HIGH

DRY OPERATION

MODE

1. Press

: Select Dry

2. Press

: Set the desired temperature.

Hi-POWER OPERATION

Press

: Start and stop the operation.

Hi POWER

ECO OPERATION

Press

Start and stop the operation.

hour for 2 hours (maximum 2 degrees increase). For heating operation the

set temperature will decrease.

TEMPORARY OPERATION

• Pressing the RESET button, the unit can start or

stop without using the remote control.

• Operation mode is set on AUTOMATIC

operation, preset temperature is 24°C

and fan operation is automatic speed.

TIMER OPERATION

Set the timer when the air conditioner is operating.

Setting the ON Timer

Press

: Set the desired

ON timer.

Press

: Set the timer.

Press

: Cancel the timer.

Daily timer allows the user to set both the ON & OFF timers and will be

activated on a daily basis.

Setting Daily Timer

Press

: Set the ON timer.

: Set the OFF timer. 4

Press

• During the daily timer is activating, both arrows ( , ) are indicated.

Note:

• Keep the remote control in accessible transmission to the indoor unit;

otherwise, the time lag of up to 15 minutes will occur.

• The setting will be saved for the next same operation.

, MED

, MED+

, or

, or Fan only

, MED

, MED+

Setting the OFF Timer

Press

: Set the desired OFF

timer.

Press

: Set the timer.

Press

: Cancel the timer.

Press

: button during the

( or ) mark ﬂ ashing.

1/13/58 BE 2:17 PM