Dimplex BF36E Руководство по установке

Просмотреть онлайн или скачать pdf Руководство по установке для Крытый камин Dimplex BF36E. Dimplex BF36E 10 страниц. Optiflame electric fireplace
Также для Dimplex BF36E: Руководство по эксплуатации (13 страниц)

Печатать страницу

1. Model Specifications

INSTALLATION GUIDE FOR THE

OPTIFLAME ELECTRIC FIREPLACE

LISTINGS AND CODE APPROVALS

The BF series fireplaces have been tested in accordance with the UL 2021and CSA C22.2 No. 46 standards for

fixed and location-dedicated electric room heaters.

MODEL SPECIFICATIONS

Model

Description

Number

BF36E

36"

120/208/240

Economy

BF36ST

36"

120/208/240

Standard

BF36DX

36"

120/208/240

Deluxe

BF42ST

42"

120/208/240

Standard

BF42DX

42"

120/208/240

Deluxe

NOTE: Power ratings shown include the light bulbs and motor (275 watts)

STEP-BY-STEP INSTALLATION

1. Rough in framing opening following the recommended dimensions (Section A: Framing).

2. Allow 8" of service cable for connecting to the junction box on the fireplace. Remove the outer jacket and

strip the individual conductors ½" from the end.

3. Loosen the screw securing junction box cover and remove the cover.

4. Remove knockouts if necessary or use the provided cable clamp.

5. Place unit in position in the opening, level with shims if necessary and attach unit to frame using nailing

flanges provided.

6. Unit is factory wired for 208/240 volt power supply. If 120 volt operation is required, slide the switch and

reconfigure the wiring as covered in section C wiring. Wires L1, L2, N & G are attached to the rear of the

junction box cable clamp for easy access.

7. Wire a dedicated, properly fused circuit with a 20amp rating for the appropriate voltage (120, 208/240).

8. Make wall mounted thermostat and or wall switch connections as outlined in Section C: Wiring.

9. Place all connectors inside the unit and replace the junction box cover, ensuring that the cable clamp grips

only the jacket of service, thermostat and if applicable wall switch lines.

Voltage

Rated Power

Volts

Watts

1650/2340/3025

(Note: Please read all instructions before installing)

Remote

Wall

Refractory

Control

Thermostat

Brick Look

N/A

Included

7205180100REV01

AMPS

120Volt

208Volt

N/A

13.75

11.25

N/A

13.75

11.25

Included

13.75

11.25

N/A

13.75

11.25

Included

13.75

11.25

AMPS

240Volt

12.6