Epson PowerLite 4650 Краткая справочная карточка - Страница 2

Просмотреть онлайн или скачать pdf Краткая справочная карточка для Программное обеспечение Epson PowerLite 4650. Epson PowerLite 4650 7 страниц. Remote control information
Также для Epson PowerLite 4650: Руководство по эксплуатации (48 страниц), Руководство по эксплуатации (47 страниц), Технические характеристики продукта (6 страниц), Декларация о соответствии (4 страниц), Руководство по установке (3 страниц), Функциональное руководство (2 страниц), Краткая справка (6 страниц)

Печатать страницу
Epson PowerLite 4650 Краткая справочная карточка

Turning the Projector On

1. Turn on your computer or image
source.
2. Remove the lens cover.
3. Press the
power button (projector)
On button (remote control).
or
After the power light stays green, the
projector is ready.
Note: If the Direct Power On function is
enabled, you can turn the projector on
without pressing the power button; just
plug it in or flip the switch controlling
the outlet to which the projector is
connected. To turn on this feature, see
the online User's Guide.
4. If your image does not appear, see

"Switching Between Image Sources"

or "Troubleshooting."
Changing the Language of
the Projector Menus
The default language of the projector's
menu system is English, but you can
change it as necessary.
1. Press the Menu button to acess the
projector's menu system.
2. Select Extended and press
3. Select Language and press
4. Select your language and press
5. When you're done, press Menu
to exit.
Switching Between Image
Sources
Press the Search button or one of
the source buttons (remote control),
or the Source Search button
(projector).

Changing Screen Type

Set the Screen Type setting to the
screen's aspect ratio.
1. Press the Menu button.
2. Select Extended > Display >
3. Select the screen's aspect ratio.
4. When you're done, press Menu
.
.
.

Adjusting Image Position

1. Release the lens shift dial lock.
Screen > Screen Type.
Note: The displayed image should
match the screen's size and shape.
to exit.
Note: After changing the screen
type, you may need to change the
aspect ratio of the projected image
depending on the input signal. Press
the Aspect button on the remote
control to change the aspect ratio, if
necessary.