Toshiba 19DV500B Руководство пользователя - Страница 24

Просмотреть онлайн или скачать pdf Руководство пользователя для ТЕЛЕВИЗОР Toshiba 19DV500B. Toshiba 19DV500B 45 страниц.

Печатать страницу

Toshiba 19DV500B Руководство пользователя

Timers - Digital and Analogue, Conditional

Programme Timers - Digital Only

This feature will set the television to go to a speciﬁ c channel at

a certain time. It can be used to view a particular programme,

or by setting the mode to daily or weekly, can be used to view

a series of programmes.

•

Press

MENU and Up or Down to select Timers item menu

and press OK to continue.

•

To add a timer, press the

control. Then Add Timer window appears.

Channel: Left or Right keys will navigate the user through

the TV or Radio list.

Date: Starting date is entered via the Left/Right or the

numeric buttons.

Start: Starting time is entered via the Left/Right or the

numeric buttons.

End: Ending time is entered via the Left/Right or the numeric

buttons.

Change/Delete: permits or prohibits any modiﬁ cations for

other users.

Duration: Duration between Start and End time.

Repeat: You can set a timer to be repeated as Once, Daily

or Weekly.

•

You can save the adjustments by pressing the

or cancel the process by pressing the RED button.

•

You can edit the list via

RED button.

Sleep Timer - Analogue

The television can be set to turn itself Off after a certain

length of time.

•

When displaying analogue TV menu, use

button to select FEATURE menu.

•

Press

Up or Down button to select Sleep Timer.

•

Use

Left or Right button to set the desired time.

The timer can be programmed between Off and 120 minutes

in steps of 10 minutes.

If Sleep Timer is activated, at the end of the selected time,

the TV goes automatically to standby mode

00_MB45_[GB]_(01-TV)_1900UK_IDTV_NICKEL9_22740W_DVD_(IB_INTERNET)_10070651.indd 23

Access

YELLOW button on the remote

GREEN key

GREEN key and delete with the

Left or Right

English - 23 -

Conditional Access

The Common Interface Slot, situated on the side of the

television, enables the insertion of a CAM (Conditional Access

Module) and card. These are purchased from a service

provider and allow additional subscription broadcasts to be

viewed. For more information, see a service provider.

•

Insert the CAM and card into the Common Interface Slot,

following the instructions provided with the CAM.

•

Press the

MENU button to display the main menu and use

the " " or " " button to highlight the Conditional Access

line and press the OK button:

Important:

•

Switch off the TV and unplug from the mains.

•

The CAM should be correctly inserted, it is impossible to

insert fully if reversed. The CAM or the TV terminal may be

damaged if the CAM is forcefully inserted.

•

Connect the TV to the mains supply, switch on and then

wait for few moments until the card is activated.

•

Some CAMs may require the following set up. Please set

the CAM by entering the IDTV menu, Conditional Access

then pressing the "OK" button. (CAM set up menu is not

displayed when it is not required.)

•

To see the viewing contract information: enter IDTV; press

the "MENU" button, then highlight Conditional Access and

press the "OK" button.

•

When no module is inserted, "No Conditional Access

module detected" message appears on the screen.

•

Refer to the module instruction manual for details of the

settings.

Note: Insert or remove the CI module only when the TV is

switched off or in standby mode.

Manual Start

•

To display Media Browser window, you can press

button on the remote control and then select Media

Browser by pressing Up or Down button.

•

Press

OK button to continue. Media Browser menu

contents (depending on the contents of your USB drive)

will be displayed.

30.11.2010 02:16:45