Toshiba 20AS21 Руководство пользователя - Страница 2

Просмотреть онлайн или скачать pdf Руководство пользователя для ТЕЛЕВИЗОР Toshiba 20AS21. Toshiba 20AS21 9 страниц. Toshiba 20as21: owners manual
Также для Toshiba 20AS21: Руководство по эксплуатации (31 страниц)

Печатать страницу

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

AVIS:

RISQUE DE CHOC

ELEETRIQUE - NE PAS OUVRIR

WARNING:

TO REDUCE THE RISK OF

ELECTRIC SHOCK, DO NOT REMOVE

COVER (OR BACK). NO USER-

SERVICEABLE PARTS INSIDE. REFER

SERVICING TO QUALIFIED SERVICE

PERSONNEL.

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT

EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.

Important Information

CAUTION

TO PREVENT ELECTRIC SHOCK, DO

NOT USE THIS POLARIZED PLUG

WITH AN EXTENSION CORD

RECEPTACLE OR OTHER OUTLET

UNLESS THE PRONGS CAN BE FULLY

INSERTED INTO THE OUTLET TO

PREVENT ANY EXPOSURE OF THE

PRONGS ON THE POLARIZED PLUG.

ATTENTION

POUR PRÉVENIR LES CHOCS

ÉLECTRIQUES NE PAS UTILISER

CETTE FICHE POLARISÉE AVEC UN

PROLONGATEUR, UNE PRISE DE

COURANT OU UNE AUTRE SORTIE

DE COURANT, SAUF SI LES LAMES

PEUVENT ÊTRE INSÉRÉS À FOND

SANS EN LAISSER AUCUNE PARTIE À

DÉCOUVERT.

REMOTE CONTROL

Before using the remote control transmitter, batteries must first be installed.

HOW TO INSTALL BATTERIES

1. Open the battery compartment cover.

2. Install two "AAA" (penlight size) batteries.

3. Replace the battery compartment cover.

3J91101A E

The lightning symbol in the triangle tells you

that the voltage inside this product may be

strong enough to cause an electric shock.

DO NOT TRY TO SERVICE THIS

PRODUCT YOURSELF.

The exclamation mark in the triangle tells you

that important operating and maintenance

instructions follow this symbol.

CAUTION

The plug has one prong wider than the

other and will fit only one way into a

standard electrical

wide prong

outlet (120 volt

AC, 60 Hz). If the

plug does not fit

into the outlet, try

turning it around.

If the plug still does not fit, the outlet is

probably non-standard and must be

replaced by a qualified electrician. Do not

tamper with the plug or try to force it into

a non-standard outlet.

Note to CATV system installers in the

USA

This reminder is provided to call the

CATV system installer's attention to

Article 820-40 of the NEC, which

provides guidelines for proper grounding,

and, in particular, specifies that the cable

ground shall be connected to the

grounding system of the building, as

close to the point of cable entry as

practical.

Use two "AAA" size penlight batteries

(supplied) for the transmitter.The

batteries may last approximately one

year depending on how much the

remote control is used. For best perfor-

mance, it is recommended that batteries

should be replaced on a yearly basis, or

when the remote operation becomes

erratic. Do not mix old and new batteries

or different types.

BATTERY PRECAUTIONS

These precautions should be followed

when using batteries in this device:

1. Use only the size and type of

batteries specified.

2. Be sure to follow the correct

polarity when installing the batter-

ies as indicated in the battery

compartment. Reversed batteries

may cause damage to the device.

3. Do not mix different types of

batteries together (e.g. Alkaline and

Carbon-zinc) or old batteries with

fresh ones.

4. If the device is not to be used for a

long period of time, remove the

batteries to prevent damage or

injury from possible battery leak-

age.

5. Do not try to recharge batteries not

intended to be recharged; they can

overheat and rupture.

(Follow battery manufacturer's

directions.)

Precautions

Installing your TV

• Place the TV on the floor or on a

sturdy platform. The mounting surface

should be flat and steady. If you install

the TV on a soft floor, make sure that

the floor is not damaged by the weight

of the TV.

• Place the TV far enough away from the

walls to allow proper ventilation. This

will prevent the TV from overheating

and avoid possible damage to the TV.

Avoid dusty areas too.

Using your TV

• Do not stand or climb on the TV.

• Do not put any heavy object on top of

the TV.

• Do not place containers with liquids

such as drinks, aquariums, or lighted

candles on the TV. If any foreign

material or water leaks into the TV,

unplug the power cord and contact

your dealer.

• Avoid displaying stationary images on

your TV screen for extended periods

of time. Stationary patterns (such as

those generated by computer displays,

video games, or stock market reports)

can become permanently engrained

on the picture tube. This damage is

not protected by your warranty

because it is the result of misuse. If

you wish to use your TV to display still

images, reduce brightness and

contrast settings. Never leave a

computer or video game display

unattended.

POWER

CH RTN

RECALL

SLEEP

MUTE

CH +

VOL

–

ENTER

CH –

–

SET

RESET

TV/VIDEO

CAP/TEXT

1/2

POWER Button - Press to turn the TV on.

Press again to turn the TV off.

Direct Channel Selection Buttons (0-9) -

Allows direct access to any channel.

CH RTN Button - This button allows

you to go back to the previous channel

selected by just pressing the CH RTN

button. Press this button again to return to

the channel you were watching.

SLEEP Button - To set the TV to turn off

after a preset amount of time, press the

SLEEP button on the remote control.

The clock will count down 10 minutes

each time the button is pressed in the

order of 120, 110, 100, ······ 20, 10, 0.

29/09/2001, 10:39

Cleaning your TV

• To clean the TV screen:

1. Unplug the TV from the power outlet

to avoid possible shock hazard.

2. Use a clean, dry cellulose sponge or

chamois cloth to clean TV screen

and trim. Do not use liquid or aerosol

cleaning agents. Liquid spilling into

the TV cabinet may cause electric

shock or damage the TV.

CAUTION

Never use strong solvents such as

thinner, benzene, or other chemicals on

or near the cabinet, as they can damage

the finish of the cabinet.

After the sleep time is programmed,

the display will disappear then reappear

momentarily every ten minutes to remind

you the sleep timer function is operating.

To confirm the sleep time setting, press

the SLEEP button once and the remaining

time will be momentarily displayed. To

cancel sleep time, press the SLEEP button

repeatedly until the display turns to 0.

VOL (VOLUME) +/– Buttons - Press the

+ button to increase, or the – button to

decrease the volume level.

MENU Button - Press to display the On-

Screen menu function.

SET +/– Buttons - Press to select the

desired setting during On-Screen operations.

RESET Button - Press to reset the On-

Screen picture adjustments to their

factory preset positions.

TV/VIDEO Button - Switches between TV

and external inputs.

10.

RECALL Button - When you press this

button, the channel number will appear in

the upper right corner of the screen. Press

the button again to remove display from

the screen.

11.

MUTE Button - To turn off the sound,

press this button once. The TV will be

silenced and the symbol "MUTE" will

appear on the screen. The muting feature

can be released by pressing the MUTE

button again or one of the VOL + or – buttons.

12.

CH (CHANNEL) +/– Buttons - Press

the + button to change to a higher

numbered channel set into memory. Press

the – button to change to a lower numbered

channel set into memory.

13.

ENTER Button - Press to enter or select

information for On-Screen operations.

14.

CAP/TEXT Button - Press this button to

switch between normal TV and the two

Closed Caption modes (captions and 1/2

of full screen text). Closed Captioning will

display text on screen for hearing impaired

viewers.

15.

1/2 Button - Switches between Channel 1

and Channel 2 in the Closed Caption mode.