MSI 610BF Руководство - Страница 11

Просмотреть онлайн или скачать pdf Руководство для Материнская плата MSI 610BF. MSI 610BF 45 страниц.

provide two plugs (P8 and P9), each containing six wires, two of which are black. Orient

the connectors so that the black wires are located in the middle.

Using a slight angle, align the plastic guide pins on the lead to their receptacles on the

connector. Once aligned, press the lead onto the connector until the lead locks into place.

Power Connector: ATX Power Connector (20-pin block): ATPW1

ATX Power Supply connector. This is a new defined 20-pins connector that usually comes

with ATX case. The ATX Power Supply allows to use soft power on momentary switch that

connect from the front panel switch to 2-pins Power On jumper pole on the motherboard.

When the power switch on the back of the ATX power supply turned on, the full power will

not come into the system board until the front panel switch is momentarily pressed. Press

this switch again will turn off the power to the system board.

3. Keyboard Connector (5-pin female): JKB1

This connection is for a standard IBM-compatible keyboard. May also be known as a 101

enhanced keyboard.

4. PS/2 Mouse Connector (5-pin block): JMS1

If you are using a PS/2 mouse, you must purchase an optional PS/2 mouse set which

connects to the 5-pins block and mounts to an open slot on your computer's case.

Please don't turn off / on power supply too

quickly ,we recommend at least wait 4sec

before turn on the power , to protect the

system