Toshiba DIGITAL Series Руководство пользователя - Страница 12

Просмотреть онлайн или скачать pdf Руководство пользователя для Принтер "все в одном Toshiba DIGITAL Series. Toshiba DIGITAL Series 50 страниц. Split type
Также для Toshiba DIGITAL Series: Руководство пользователя (48 страниц), Руководство пользователя (45 страниц), Руководство пользователя (49 страниц), Руководство пользователя (48 страниц), Руководство пользователя (4 страниц), Руководство пользователя (41 страниц), Руководство пользователя (22 страниц), Указания по установке (4 страниц)

Печатать страницу

Toshiba DIGITAL Series Руководство пользователя

Important safety information (continued)

• This set should only be connected to an 220-240V AC 50Hz

mains power supply. Do not attempt to connect it to any other

type of supply.

• The socket outlet must be installed near the equipment and

is easily accessible.

• Do not open this unit. An attempt to repair the unit by a

non-expert could be dangerous and potentially cause a ﬁ re

hazard. All repairs must be carried out by qualiﬁ ed service

personnel only.

• Keep away from rodents. Rodents (and also cockatiels)

enjoy biting electric ﬂ exes. They can cause a short circuit

(ﬁ re hazard!) and receive a fatal electric shock.

• Always hold the plug when disconnecting the unit from

the socket outlet. Do not pull on ﬂ ex. The ﬂ ex can become

overloaded and cause a short circuit.

• Use a soft, dry cloth to clean the unit.

• Set up unit so that no one will trip over the ﬂ ex.

• This unit is recommended to be installed on shock-free

benches in order to avoid any danger from falling.

• Take note that toddlers can pull the unit down from a table or

cupboard by means of its ﬂ ex. Children can hurt themselves

when doing this.

• Do not use the unit near heat sources. The casing and ﬂ ex

could be damaged by the intensity of the heat.

• The screen is made of glass and can break if damage is done

to it. Be careful when collecting sharp edged glass splitters.

• If you intend to wall mount the unit, contact the shop where

you purchased the unit for advice, and leave the installation

work to professionals. Improper installation can cause

damage and/or injuries.

• When installing the set on a wall, allow at least 10 cm

clearance between the rear of the set and the wall. Clearance

of less than 10 cm will obstruct the vents and cause

overheating to the interior of the set, resulting in faults or

damage to the set.

• Taking fall-prevention measures

- If these measures are not taken, the unit can fall and cause

damage and/or injuries.

- Contact the shop where you purchased the unit to obtain

full details of the measures.

• When a TV stand is used,

- Ensure the unit is fully on the stand and placed in the

centre.

- Do not leave the stand doors open. You could be hurt as

a result of the unit falling or breaking, or your ﬁ ngers being

caught or jammed. Take extra precautions if you have

children.

• Avoid placing the unit on any surfaces that may be subject

to vibrations or shocks.

• To protect the unit during a thunder storm, unplug the AC

power cord and disconnect the aerial.

Caution: Do not touch the aerial connector.

• When you leave your home for a long period of time, unplug

the AC power cord for safety.

40BL702B_MB65_[GB]_(IB_INTERNET)_DVB-T_(3910UK)_10075901.indd 11

• The unit becomes warm when in operation. Do not place

any covers or blankets on the unit in order to prevent

overheating.

The ventilation holes should not be blocked. Do not set up

near radiators. Do not place in direct sunshine.

• When placing on a shelf, allow at least 10 cm clearance

space around the whole unit.

• The unit shall not be exposed to dripping or splashing, and

no objects ﬁ lled with liquids, such as vases, shall be placed

on the apparatus.

• Liquids spilled into the unit can cause serious damage.

Switch the set off and disconnect the mains power supply,

then consult a qualiﬁ ed service person before attempting to

use the unit again.

• Moisture condensation occurs, for example, when you pour

a cold drink into a glass on a warm day and drops of water

form on the outside of the glass. In the same way, moisture

may condense on this unit's internal optical pick-up lens, one

of the most crucial internal parts of the unit.

• Moisture condensation occurs in the following situations:

- When you move the unit from a cold place to a warm

place.

- When you use the unit in a room where the heater was

just turned on.

- When you use the unit in an area where cold air from an air

conditioner directly hits the unit.

- When you use the unit in a humid place.

• Never use the unit when moisture condensation may

occur.

• Using the unit when moisture condensation exists may

damage its own internal parts and discs. Connect the power

cord of the unit to the wall outlet, turn on the unit, remove the

disc, and leave it for two or three hours. After two or three

hours, the unit will warm up and moisture will be evaporated.

Leaving the TV connected to the wall outlet will help prevent

moisture condensation in the unit.

• Never place hot objects or open ﬂ ame sources, such as

lighted candles or night lights, on or close to the TV. High

temperatures can melt plastic and lead to ﬁ res.

- 11 -

21.01.2012 18:06:00