Epson Stylus Pro 4800 Portrait Edition Руководство по настройке - Страница 8

Просмотреть онлайн или скачать pdf Руководство по настройке для Программное обеспечение Epson Stylus Pro 4800 Portrait Edition. Epson Stylus Pro 4800 Portrait Edition 15 страниц. Stylus pro 800 series
Также для Epson Stylus Pro 4800 Portrait Edition: Брошюра и технические характеристики (8 страниц), Руководство по началу работы (10 страниц), Руководство (17 страниц), Важная информация (2 страниц), Краткое справочное руководство (12 страниц), Ограниченная гарантия (12 страниц), Брошюра и технические характеристики (6 страниц), Руководство по установке (4 страниц), Брошюра и технические характеристики (16 страниц)

4. Slide the movable flange (removed in step 1)

onto the spindle and into the end of the roll

paper until it fixes into place.

Attaching roll paper to the printer

To attach roll paper to the printer, follow the steps

below.

1. Open the roll paper cover.

2. Make sure that the movable flange is fixed into

the end of the roll paper properly.

3. Hold the roll paper spindle so that the black

movable flange is on the left side. Then place

the spindle in the groove located on the top of

the printer.

Black movable flange

4. Move the paper lever to the released position.

5. Hold the both sides of the paper, and load the

paper in the paper insertion slot.

6. Pull the paper until it hangs down over the

paper tray.

Note:

If thin paper is loaded, press the Paper Feed

button to decrease the value of paper suction. If

thick and curled paper is loaded, press the Paper

Feed

button to increase the value of paper

suction.