Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst Инструкции по распаковке и установке - Страница 18

Просмотреть онлайн или скачать pdf Инструкции по распаковке и установке для Программное обеспечение Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst. Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst 28 страниц. Warranty statement
Также для Epson Stylus Pro 7880 ColorBurst Edition - Stylus Pro 7880 ColorBurst: Брошюра (1 страниц), Технические характеристики (2 страниц), Начало работы (13 страниц), Брошюра и технические характеристики (8 страниц), Руководство по работе с сетью (46 страниц), Руководство (12 страниц), Ограниченная гарантия (12 страниц)

4. Set 2 paper guides at the bottom of the printer

as shown below, when you feed the paper

forward or backward.

After attaching the paper guides, be sure to fix

them in the forward position.

Reusing the Packaging

If you need to transport your printer a long

distance, the printer should be repacked using the

original boxes and packing materials. Contact

your dealer for assistance.

Setting up the Printer

Note:

Most illustrations shown in this section are for EPSON

Stylus Pro 9880/9880C/9450, so they may vary in

appearance from EPSON Stylus Pro

7880/7880C/7450. The instructions are the same,

except as noted.

1. Check the label on the back of the printer to

make sure the voltage required by the printer

matches that of the wall outlet. Also, make

sure that you have the correct power cord for

your power source.

Caution:

It is not possible to change the printer's

voltage. If the rated voltage and your outlet

voltage do not match, do not plug in the

power cord, and contact your dealer for

assistance.

2. Connect the power cord to the AC inlet on the

back of the printer.