Epson Stylus Pro 9600 Photographic Dye Ink Информация о продукте - Страница 13

Просмотреть онлайн или скачать pdf Информация о продукте для Программное обеспечение Epson Stylus Pro 9600 Photographic Dye Ink. Epson Stylus Pro 9600 Photographic Dye Ink 15 страниц. Large format digital colour printing
Также для Epson Stylus Pro 9600 Photographic Dye Ink: Брошюра и технические характеристики (24 страниц), Руководство по распаковке и настройке (24 страниц), Информационный справочник (16 страниц), Список деталей (21 страниц), Руководство по быстрой установке (34 страниц), Краткое справочное руководство (11 страниц), Брошюра и технические характеристики (8 страниц), Брошюра и технические характеристики (6 страниц), Брошюра и технические характеристики (16 страниц), Справочное руководство по продукту (28 страниц), Технические характеристики (4 страниц), Обновление руководства (4 страниц)

Печатать страницу

Epson Stylus Pro 9600 Photographic Dye Ink Информация о продукте

Charging the Ink

Once draining is complete, make sure you have the correct

black ink cartridges available for the black ink mode you're

switching to. Then follow these steps:

1. Insert all the ink cartridges into the printer. Be sure to

install the correct black ink cartridges for the black ink

mode you're switching to.

2. Lower the ink lever. The printer begins charging the ink

delivery system.

3. Once the charging is complete, the printer stops making

noise and displays READY on the control panel.

Continue on to the next section to update your printer driver

software.

Updating the Macintosh Driver

If you're printing from a Macintosh, you need to update

the driver so that it knows which black ink mode you're

using. (In Windows, the driver is updated automatically.)

1. Open the Chooser from the Apple menu.

2. Click the printer icon and port, as shown.

Close when done

3. Close the Chooser. This completes the black ink

replacement.

Replacing the Cutter Blade

If you notice that your paper isn't cut cleanly, the cutter blade

may need to be replaced. If you use the blade to cut heavy

stock or non-EPSON media, you may need to replace it more

often. You can check the status of your cutter by printing the

status check sheet (see page 9).

1. Make sure that the printer is on and the front cover is

closed.

2. Press the SelecType button on the control panel. You see

PRINTER SETUP.

3. Press d until you see MAINTENANCE, then press r . You

see PWR CLEANING.

4. Press d until you see CUTTER REPL, then press r . You

see EXEC.

5. Press Enter. The carriage moves to the cutter replacement

position.

6. You see a message on the control panel telling you to open

the front cover. Open the cover to access the carriage.

Click

here . . .

then here

7. Push down on the side pin, then turn the latch to the right.

7/02

EPSON Stylus Pro 7600 and 9600

EPSON Stylus Pro 7600 and 9600 - 14