Epson StylusRIP Professional (Stylus Photo 2200 Бюллетень поддержки продуктов - Страница 5

Просмотреть онлайн или скачать pdf Бюллетень поддержки продуктов для Программное обеспечение Epson StylusRIP Professional (Stylus Photo 2200. Epson StylusRIP Professional (Stylus Photo 2200 6 страниц. Product support bulletin(s)
Также для Epson StylusRIP Professional (Stylus Photo 2200: Начните здесь Руководство (6 страниц), Технические характеристики (2 страниц), Бюллетень поддержки продуктов (10 страниц), Бюллетень поддержки продуктов (1 страниц), Бюллетень поддержки продуктов (4 страниц)

Updating the firmware:

1.) Configure the Mac and the print server for TCP/IP.

2.) Download/copy the "WLEP399.bin" firmware file from the epson10651.sea.hqx to

the Apple Desktop.

3.) Navigate to Macintosh HD>Applications>Utilities>Terminal

4.) At the terminal screen do the following:

1. Type cd desktop then press the RETURN key

2. Type tftp <ipaddress* of the print server> then press the RETURN key

3. At the tftp> prompt, type binary then press the RETURN key

4. At the tftp> prompt, type put <WLEP399.bin**> then press the RETURN key

*Where ipaddress is the IP address of the Wireless print server.

135.79.2.468 or 10.0.1.3

**Where WLEP399.bin is the filename of the 3.99 firmware update.

5. You will get a message on the screen, at the TFTP> prompt, that a number of bytes

were sent. This means the update is complete.

5.) Next, go to the print server and perform a reset, then launch WP-Admin again to setup the

print server. At WP-Admin in the search screen, click on CLEAR, then click on START for

the print server to reappear. Finish the print server configuration, then Quit WP-ADMIN.

Search for the printer:

Once the update is complete, open the Print Center.

Select ADD Printer and choose Epson AppleTalk. This will allow you to select the Stylus

Photo 2200 printer.

Page 2 of 2

Examples