Philips AZ5738 Руководство пользователя - Страница 26

Просмотреть онлайн или скачать pdf Руководство пользователя для Стереосистема Philips AZ5738. Philips AZ5738 27 страниц. Cd soundmachine
Также для Philips AZ5738: Технические характеристики (2 страниц), Краткое руководство по эксплуатации (1 страниц), Руководство пользователя (28 страниц), Краткое руководство по эксплуатации (1 страниц), Руководство пользователя (27 страниц), Технические характеристики (2 страниц), Руководство по эксплуатации (20 страниц)

Печатать страницу
Philips AZ5738 Руководство пользователя

Troubleshooting

Problem
The system does not respond
when the buttons are pressed.
The language subtitle cannot be
changed when playing a DVD.
Sound cannot be heard or is of
poor quality
Poor radio reception.
Recording or playback cannot be made
The tape deck door cannot open
The remote control does not
function.
26
Solution
– Confirm the source switch location. Some
buttons/knob/keys are available only in the
related mode (for example cassette recorder
keys is available only in TAPE mode.).
– Disconnect the power plug from the jack, and
insert again.
– Multi-language subtitle is not recorded on the
DVD.
– Changing the language for subtitle is prohibited
on the DVD.
– Adjust the volume.
– If the system is in pause, slow motion or fast
forward/reverse mode, press 2; to resume the
normal play mode.
– Make sure the MP3-CD was recorded within 32-
256 kbps bit rate with sampling frequencies at 48
kHz, 44.1 kHz or 32 kHz.
– If the signal is too weak, adjust the antenna
for better reception.
– Increase the distance between the System and
your TV set or VCR.
– Clean deck parts, see "Maintenance".
– Use only NORMAL tape.
– Apply a piece of adhesive tape over the missing
tab space.
– Remove and reconnect the AC power plug and
switch on the system again.
– The remote control is available in disc mode only.
– Point the remote control at the remote control
sensor of the unit.
– Reduce the distance to the player.
– Remove any possible obstacles.
– Replace the batteries with new ones.
– Check that the batteries are loaded correctly.