MSI MSI-8000HD Руководство по эксплуатации - Страница 31

Просмотреть онлайн или скачать pdf Руководство по эксплуатации для Монитор MSI MSI-8000HD. MSI MSI-8000HD 48 страниц. Rf remote display

Печатать страницу
MSI MSI-8000HD Руководство по эксплуатации
Using ScCMP application, custom output strings are possible. See the ScCMP
programming guide for details.
The serial output is configured as 9600 baud, Xon/Xoff handshaking, no hardware
handshaking, 1 stop bit, no parity. Other baud rates are possible by special order only.
Printer / Output Setup
1) With the MSI-8000 on, press the
F1
key and the
simultaneously.
2) The LCD shows "Print". Press
F1.
3) The sub-menu item "StrnG"
(String) appears. Press
4) The current Print Mode format
number is displayed.
5) Setup a print format with one or
more digits representing the data
type required for the print output.
In this example, we'll set the Print format
for a Net, Gross, Tare output with a
carriage return/line feed between each
print output. The number entry required
will be 2349. The 2 is for Net weight,
the 3 for Gross weight, the 4 for Tare
weight, and the 9 inserts a space before
the next print output.
6) Using the
F2
the digits until the desired digit
is shown, then press
the digit value. Repeat for the
remaining digits.
7) When the entire number is
displayed press F1. The next
item in the Print menu appears,
"Cntrl".
8) Press
F1
to enter the Print
Control Menu. The last set control
mode will appear.
9) To change the print control mode,
press F2.
In this example, we'll set the Print Control
Mode to Continuous.
10) Press
F2
key until the desired
print control mode is shown.
11) When the desired print mode is
shown, push
next Print setup item, "rAte"
appears. If you have set
Continuous (Cont) as your print
control, proceed to step 12). For
any other Control mode jump to
step 15
F3
keys
F1
.
Key, scroll through
F1
to enter
F1
to save. The
Figure 5-7. Printer/Output Set Up
Press Simultaneously
blinking
Example Value
SCROLL
blinking
ENTER/SELECT
fixed
ENTER/SELECT
fixed
ENTER/SELECT
fixed
ENTER/SELECT
xed
ENTER/SELECT
SCROLL
Print is disabled
SCROLL
Print is disabled
ENTER/SELECT
Next Print Menu Item
ENTER/SELECT
1= Current Wt
2= Net Wt
ENTER/SELECT
3= Gross Wt
4= Tare Wt
5= Total Wt
6= Total Count
7= Current Wt
8=
(Reserved)
9= CR-LF ( )
SCROLL
SCROLL
SCROLL
SCROLL
ENTER/SELECT
SCROLL
SCROLL
Exit and Cancel Changes
Exit and Save/Back 1 Lev
0
COMM Set Up
(Wt-Unit-Mode
(Wt-Unit-Net
)
(Wt-Unit-Grs
)
(Wt-Unit-Tare
)
(Wt-Unit-Total
)
(#Samples-TCNT
(no units or mode
blinking
blinking
blinking
blinking
Next Print Menu Item
Function Key Prints
Function Key Prints
Enter / Select
F1
Scroll
F2
27