USB playability information
Compatible USB devices:
•
USB flash memory (USB2.0 or USB1.1)
•
USB flash players (USB2.0 or USB1.1)
•
memory cards (requires an additional card
reader to work with this unit)
Supported formats:
•
USB or memory file format: FAT12, FAT16,
FAT32 (sector size: 512 bytes)
•
MP3 bit rate (data rate): 32-320 Kbps and
variable bit rate
•
Directory nesting up to a maximum of 8
levels
•
Number of albums/ folders: maximum 99
•
Number of tracks/titles: maximum 999
•
File name in Unicode UTF8 (maximum
length: 32 bytes)
Unsupported formats:
•
Empty albums: an empty album is an album
that does not contain MP3/WMA files, and
will not be shown in the display.
•
Unsupported file formats are skipped. For
example, word documents (.doc) or MP3
files with extension .dlf are ignored and
not played.
•
WMA, AAC, WAV, PCM audio files
•
DRM protected WMA files (.wav, .m4a,
.m4p, .mp4, .aac)
•
WMA files in Lossless format
Supported MP3 disc formats
•
ISO9660, Joliet
•
Maximum title number: 128 (depending on
file name length)
•
Maximum album number: 99
•
Supported sampling frequencies: 32 kHz,
44.1 kHz, 48 kHz
•
Supported Bit-rates: 32~256 (kbps),
variable bit rates
8 Troubleshooting
Warning
•
Never remove the casing of this device.
To keep the warranty valid, never try to repair
the system yourself.
If you encounter problems when using this
device, check the following points before
requesting service. If the problem remains
unsolved, go to the Philips Web page
(www.philips.com/support). When you contact
Philips, make sure that the device is nearby
and the model number and serial number are
available.
No power
•
Make sure that the AC power cord of the
device is connected properly.
•
Make sure that there is power at the AC
outlet.
•
As a power-saving feature, the system
switches off automatically 15 minutes after
track play reaches the end and no control
is operated.
No sound or poor sound
•
Adjust the volume.
•
Check that the speakers are connected
correctly.
•
Check if the stripped speaker wires are
clamped.
No response from the unit
•
Disconnect and reconnect the AC power
plug, then turn on the unit again.
Remote control does not work
•
Before you press any function button, first
select the correct source with the remote
control instead of the main unit.
•
Reduce the distance between the remote
control and the unit.
•
Insert the battery with its polarities (+/–
signs) aligned as indicated.
•
Replace the battery.
EN
13
Печатать страницу