Toshiba TLP-ET1U Руководство пользователя - Страница 7
Просмотреть онлайн или скачать pdf Руководство пользователя для Проектор Toshiba TLP-ET1U. Toshiba TLP-ET1U 50 страниц. 3lcd projector
Печатать страницу
Before Using
IMPORTANT PRECAUTIONS
Save Original Packing Materials
The original shipping carton and packing materials will come in handy if you ever have to ship your LCD projector. For
maximum protection, repack the set as it was originally packed at the factory.
Moisture Condensation
Never operate this unit immediately after moving it from a cold location to a warm location. When the unit is exposed
to such a change in temperature, moisture may condense on the crucial internal parts. To prevent the unit from
possible damage, do not use the unit for at least 2 hours when there is an extreme or sudden change in temperature.
Place and Manner of Installation
• Do not place the projector in hot locations, such as near heating equipment. Doing so could cause
malfunction, and shorten the life of the LCD panel.
• Avoid locations with oil or cigarette smoke. Doing so will dirty the LCD panel and other optical parts,
shortening their lives, and darkening the screen.
• Do not place slantwise in angle of 20° or more. Doing so could shorten the life of the lamp.
• Using this product near a TV or radio may cause interference to the images or audio sound. If this happens,
move it away from the TV or radio.
• Moving the projector from a low-temperature room to a high-temperature room may cause condensation on the
lens or internal parts of the product. If you continue to use it in that situation, the malfunction may result.
Ensure to wait until the condensation naturally disappears.
• In a high altitude location where air is thin, cooling efficiency of the projector is reduced. In this case, lower the
ambient temperature and use it.
Avoid Volatile Liquid
Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or plastic products
touching the unit for a long time. They will leave marks on the finish.
If cleaning with a chemically saturated cloth, be sure to follow the product's precautions.
LCD Panel
The life of the LCD panel is limited. Take care over the points below so as to use the panel for years.
• To prolong the life of this panel, never fail to turn the power off when the panel is not in use and make sure that
the lamp has gone out. The state of the lamp being extinguished helps enhance the effect of energy saving.
• If the air filter is stained and is clogged up, the main unit inner temperature rises. As a result, the life of the
LCD is shortened and a malfunction may also occur.
Clean the air filter from time to time and replace it regularly. It is recommended that this replacement be done
at the time of replacing a lamp. (Ask a dealer where the unit was purchased or your nearby service station
about an air filter for replacement.)
In the spaces provided below, record the Model and Serial No. located at the bottom of your LCD projector.
Model No.
Retain this information for future reference.
EXEMPTION CLAUSES
• Toshiba Corporation bears no responsibility in the case of damages arising from natural disaster (such as
earthquakes, lightning, etc.), fires not liable to Toshiba Corporation, operating by third parties, other accidents,
or use under abnormal conditions including erroneous or improper operation and other problems.
• Toshiba Corporation bears no responsibility for incidental damages (lost profit, work interruption, corruption or
loss of the memory contents, etc.) arising from the use of or the inability to use this unit.
• Toshiba Corporation accepts no liability whatsoever for any damages arising from not having followed the
descriptions in this Instruction Manual.
• Toshiba Corporation accepts no liability whatsoever for any damages arising from malfunctions arising from
combination with equipment or software that is not related to Toshiba Corporation.
Serial No.
7