PowerLite
1830
®
Quick Setup
Before using the projector, make sure you read the safety instructions in the
User's Guide on your projector CD.
Connect the projector
Choose from the following connections:
Computer Monitor Port
Connect a computer using the VGA cable that came with the projector.
Connect one end to the projector's Computer1 or Computer2 port, and the
other end to your computer's
switch it to external display. You can also connect an audio cable.
Computer USB Port
Connect a computer (Windows
®
came with the projector.
Connect the square end of the USB cable to the projector's USB
(square) port. Connect the flat end of the cable to any USB port on your
computer.
Follow the on-screen instructions to install the Epson USB Display software.
(You need to install the software only the first time you connect.) Then press
the USB button on the remote control.
Network (LAN)
Connect the projector to your network using an Ethernet
"Network Configuration" on the back of this sheet for more information.
*411783500*
*411783500*
monitor port. If you are using a notebook,
2000 or later only) using the USB cable that
cable. See
®
Video Player
Connect up to 4 video devices and use the remote control to switch
between them.
* These cables are optional.
Camera or USB Device
Connect a digital camera, Epson Document Camera, or other USB device to the
projector's USB Type A (flat) port.
Thumb drive
TypeB
DC-06 document camera
If you connect a digital camera or USB storage device, you can use the
projector's Slideshow feature. See the Network and PC Free Operation Guide on
your projector CD.
For information on connecting an external monitor or external speakers, see
the User's Guide on your projector CD.
Turn on your equipment
1
Turn on your computer or video source.
2
Plug in the projector.
Digital camera
Печатать страницу