Croydex AM302021 Инструкции по установке - Страница 3
Просмотреть онлайн или скачать pdf Инструкции по установке для Сантехника Croydex AM302021. Croydex AM302021 4 страницы. Flexi-fix riser rail
Печатать страницуC
WHEN USING ADHESIVE FIXING METHOD
Before starting
ensure all surfaces
are clean and free
from dirt and soap
residue,
particularly if
adhereing to tiled
walls.
Place assembled wall plate in
desired location and press firmly.
Undo locking nut and remove wall
plate leaving the alignment guide
stuck to wall
Cut the end of the sachet and apply
a generous amount of adhesive to
the back of the wall plate as shown.
(Each sachet has su cient adhesive
for two wall plates).
3
Place the square
nut into the recess
in the back of the
wall bracket.
Assemble wall plate, alignment
guide and locking nut as shown.
Partially insert the
grub screw into
the threaded hole
in the square nut.
(
Please refer to Important Adhesive Information at
TIP!
To ensure the
Riser Rail is
vertical, mark the
wall using one
wall plate and
using a spirit level,
mark the second
plate whilst being
careful not to
exceed the
recommended
centre distances.
Su cient
adhesive must be
applied to give a
uniform thickness
of approximately
1.5mm when the
wall plate is
positioned
against the wall.
Once the Flexi-Fix
wall plates are
secured to the
wall, place the
Riser Rail brackets
over each of the
Flexi-Fix wall
plates and secure
by tightening the
grub screw with
the hex key
provided.
DO NOT
OVERTIGHTEN.
the front of this leaflet before proceeding
Remove backing from adhesive
pad on alignment guide.
i
AM1824## /
AM1825## /
AM1826##
Max Distance =
720mm
AM3000## /
AM3020##
Max Distance =
600mm
Carefully place the wall plate over the
alignement quide and allow the rotation
of the locking nut to secure the wall plate
in position. DO NOT PRESS IN POSITION!
Leave the adhesive to set for 24 Hours
Step 3
Image shown for reference only - grub
screw previously fitted into wall bracket.
)
LEAVE
24
HOURS
SWR 060 R03