CRU Rhino Jr RJ33S Краткое руководство по эксплуатации - Страница 2
Просмотреть онлайн или скачать pdf Краткое руководство по эксплуатации для Шкаф CRU Rhino Jr RJ33S. CRU Rhino Jr RJ33S 2 страницы. Enclosure
Печатать страницу2
CRU Rhino Jr RJ33S Quick Start Guide
1 Hardware Setup
1.1 Frame InStallatIon
a. Slide the Rhino Jr RJ33S removable drive enclosure into an open 5.25" drive bay in your
computer workstation.
b. Secure the RJ33S to the chassis with the mounting screws provided.
c. Connect the included unified power and data cable to the rear of the RJ33S.
d. Connect the data cable to the appropriate SAS or SATA port on your computer's mother-
board or SAS/SATA host card.
e. Attach the Molex power connector to your computer's power supply.
f.
Connect the 4-pin LED cable attached to the unified power and data cable to the open 4-pin
connector on the rear of the RJ33S.
1.2 drIve InStallatIon
a. If the Rhino Jr RJ33S is locked, use the provided key to rotate the lock switch 90 degrees
counterclockwise to unlock the drive.
b. Pull the ejection handle on the TrayFree bay to open the bay door.
c. Remove any drive already in the bay.
d. Insert a SATA drive into the bay. Make sure it's label-side up with the SATA connection on
the drive inserted first toward the rear of the enclosure.
e. Shut the bay door. When the door is shut, the green power LED will illuminate and the
drive inside the RJ33S will mount to your computer.
f.
You may optionally lock the bay door by rotating the lock 90 degrees with the included key.
2 ejectIng drIveS From tHe rj33S
After ejecting a drive, you may need to restart your computer in order to remount the
drive unless you have a hotswap-capable host.
2.1 wIndowS
a. Ensure that no file transfers are taking place by making sure that the Drive Activity LED is
not blinking, as removing the drive while a file transfer is in progress can result in data loss.
Rhino Jr RJ33S Rev 1.0 Quick Start Guide.indd 2
b. If the bay is locked, rotate the lock switch 90 degrees counterclockwise to unlock it.
c. Remove the drive from the RJ33S.
If you have a SAS/SATA host card or motherboard that supports hot-swapping,
then you should first unmount the volume by left-clicking on the the USB plug icon
with the green checkmark on the Desktop task bar and then selecting the proper
device from the menu that pops up. Volumes not on a hotswap-capable host may
not appear here.
2.2 oS X/macoS
a. First, ensure that no file transfers are taking place by making sure that the Drive Activity
LED is not blinking, as disconnecting the unit while a file transfer is in progress can result
in data loss.
b. Unmount the volume before removing the drive by dragging the volume's icon to the
trash, or by selecting the volume and pressing
c. If the bay is locked, rotate the lock switch 90 degrees clockwise to unlock it.
d. Remove the drive from the RJ33S.
3 led BeHavIor
led name
color
State
Power
Green
Solid
Amber
Blinking
Drive Activity
Amber
Solid
CRU Rhino Jr RJ33S Quick Start Guide
command +
e.
deScrIptIon
The drive is powered on.
The drive is being accessed.
The drive does not support drive activity polling.
CRU Mark
10.25.12
2/17/2017 2:11:19 PM
3
PMS 711
2 cyan
85 magenta
76 yellow