aeolus TD-905 Руководство пользователя - Страница 4

Просмотреть онлайн или скачать pdf Руководство пользователя для Средство для ухода за домашними животными aeolus TD-905. aeolus TD-905 6 страниц. Ionic pet dryer

Печатать страницу

Overview

Upper Cover

Heating Switch with

Red Indicator

Wind Speed Knob

Wind Pipe

Diﬀuser

Stainless Steel

Washer

Fixing Cover

Bearing

Nylon Cushion

Stainless Steel Washer

Sliding Pipe

Lock Screw

Lock Slider

Spring Attachment

Column

Lower Flange

Washer

Power Switch with

White Indicator

Negative Ion Switch

with Blue Indicator

Heating

Temperature Knob

Hanging Ear

Tension Fixture Screw

Lower Shell

Lock Knob

Locknut

Bearing

Supporting Circle

Power Cord

Adjusting Handle

Adjusting Knob

Clamp Jacket

Spring

Upper Flange

Leg Assembly

Hexagon Screw

Installation

TD-905 Ionic Wall-hanging Dryer

Before Installation

1. Users must choose a solid wall sturdy enough to support the arm assembly and the

machine head.

2. We recommend that the height of wall bracket installation is 1840/1950mm from floor to the

bottom of the bracket. (See Fig.1)

3. Notice that a power socket with proper power must be ready on the wall within the distance

of 500mm from the wall bracket.

Installation

Tools: an impact drill, a screwdriver, a spanner.

1. The wall plate and the wall bracket are fixed together with bolts before delivery from factory.

Use a wrench to separate them (See Fig.2).

2. Use the wall plate as a template to drill three holes on the wall (See Fig.3). The hole

should fit the bolts we supplied.

3. Use the bolts to attach the wall plate to the wall and tighten the nuts (See Fig.4).

4. Attach the wall bracket to the wall plate and tighten the bolts (See Fig.5).

Caution: Because the wall bracket and wall plate will bear a heavy load, a correct and firm

installation is needed.

5. Remove the stoppers, screws, protector plate and hook lock from the arm (See Fig.6). Attach the

arm to the hanger and reinstall all the stopper, screws, protector plate and hook lock.

Caution:

a. Before assembling or using the arm, the stopper must be removed. Otherwise the arm

will be hard to lower and the stainless steel pipe will be damaged.

b. The hook lock must be tightly inserted in position, or the dryer head may fall off and

cause injuries!

6. Attach the arm to the wall bracket.

7. The dryer windpipe fixture angle could be adjusted by moving the windpipe up and down

easily. After long time operation, the joint between the dryer head and hanging ear may go

loose. When finding the tension screws on both sides get loose, turning the slot on it

clockwise could tighten the screws. (See Fig.7) .

Fig. 1

Fig. 2

Fig. 3